junkyard calipers?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 13, 2003
Threads
12
Messages
57
Location
Medford, OR
I am planning on doing a rear disk swap this week using Eldorado calipers. If I get these from a junkyard, should I count on rebuilding them? I guess I am wondering what your experiences have been using parts like this from a yard. Thanks in advance!

Mike
 
anything I get from the pick-n-pull I rebuild.

You never know how the PO used and abused it.

You should just plan on rebuiling the calipers. Plus it really shouldent be that much to do it.
 
You really should look at your local parts supplier. I got loaded Monte Carlo calipers for like 15 bucks each. By the time you Pick and Pull them, and then rebuild em' it may come out even. Just my 2 cents. Hodag
 
my loaded calipers were $45 plus $15 core. picknpull here wanted $10 each. so with new pads it would have been $30. for 30 more I've got lifetime warranty on both pads and calipers. just something to consider
 
LMAO

Is your cruiser used? did you rebuild it? all of it?

is your old lady used? did you rebuild it?

HA HA

Eldorado calipers ARE SO FREAKIN EXPENSIVE period. last check cores are like $90 YES I SAID CORES!

I hear these are difficult to rebuild due to the e brake stuff. Slap them on if they came from a recently driving vehicle.

no time or money to spend replacing perfectly good parts with something that might look better, cause that is the only difference.

Each blinger to his own!
 
new ones

I would pick up the junkyard ones if they are cheep and then buy new ones and use the junk ones for a core charge. Callipers with e-brake have an $80 core charge most of the time. The calipers are not normally that expensive, but the core is what gets you.

I've used my LC flywheel to core a new SBC one. It wouldn't even fit in the same box..... joy of working for a parts store, you can fudge a few things.
 
Tonka, good call on picking up some junkers as cores... I think I will go that route so I can get a set from a parts place.

HI^C, I don't know why its so funny... did you rebuild your old lady too?
 
Back
Top Bottom