junked lockright

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 8, 2004
Threads
297
Messages
5,837
Location
Cloverdale B.C. Canada
Website
www.instagram.com
just thought i'd ask everyones opinion

i have a junked lockright . teeth worn out .i was wondering one day when i am bored . if i could grind the teeth or clean them up a bit .with die grinder or something . get new springs .and thrust washer . to get the tightest recommended tollerances . would this hold . was thinking about trying to salvage this thing for a cheapy locker for the front of my spare rig . would grinding wreck the strenght of the material ? or just destroy the locker completely . locker is garbage anyways . i'm talking about just cleaning up a few of the severly damaged teeth .try to square them up abit . any input would be great Jake S.
DCP_0048 (Medium).webp
DCP_0051 (Medium).webp
 
You could try it...


If it were me, I would not waste the time, being that new ones are so cheap...but that is me.


You should not have any strenght issues with this, so long as you do not create stress risers from poor grinding, or heat the parts up A LOT.


Good luck!


-Steve
 
Aren't those lockers heat-treated? If so, grinding might expose the softer material underneath and it would wear faster.

Honestly, I wouldn't bother. Aussie is having a sale for 'mud members right now.
 
thanks for the replys i was just curious i've had it laying around for a couple of years . these things aren't that cheap . once they cross the border and duty and taxes and shipping ,brokerage fees they hit the $400.00 (canadian) dollar range . i would rather save the money for an ARB . considering i've have just spent almost $800.00 canadian on the rear end of my 40 . i was cheap again .and put another lunchbox locker in the rear . ,but smallblock and 38's i don't know how long it will last . anyways i guess it will eventually get chucked .

thanks again guys
 
You can't fool with the tooth size by grinding on it. If there is any rtational slop in the driver and coupler when it is meshed, then it is toast. What makes you say it is junk? It doesn't look as bad as some I have seen.
 
Pin_Head said:
You can't fool with the tooth size by grinding on it. If there is any rtational slop in the driver and coupler when it is meshed, then it is toast. What makes you say it is junk? It doesn't look as bad as some I have seen.


i took it out because it wouldn't hold at all it started slipping (ratcheting)quite often . i thought a spring must have slipped out .it did not . i was out on a hard day wheeling .and it just wouldn't hold . i couldn't even drive home .i left in 4 wheel .and limped it out of the bush .every time i put alittle gas to it . it would just start ratching banging like crazy .truck would barely move .ended up pulling rear shaft and driving home in front wheel drive . so i just assumed it was junk. put a new one in problem solved . actually when i checked if a spring had fallen out . i pulled the whole locker out and turned it around .and it lasted another 2 months of more wheeling . and after that .i mixed .the couplers and drivers . got another 4 months . then it stopped holding . i just assumed it was junk .
 
You need to set it up again, and double check the air gap......If it were in the front I would intentionally set it up as tight as possible.

Mine in the front of Yeller is so tight I had to tap the cross pin in....no ratcheting at all in a year.

Butch
 
Texican said:
You need to set it up again, and double check the air gap.....
Butch

Texican is right once again, proving how he got the moniker "wise one".

It isn't possible for a properly set up lockright to "slip" as long as it even has even a nub of a tooth left. Get some thick shims, set it up, put it in the front and run it another 10 years.
 
cool i will set it up in my spare third member and give it a try . the thrust washers may have worn ,it was in the truck for 6 yrs . i do have a set of the thickest washer 41361-60041 they are brand new .i had them in my new locker .ended up being too tight . i hammered the cross shaft in with a hammer . week later a axle seal went . do you think i could get that pin out not a chance . ended up hammering it in . rotating 3rd . cutting piece off shaft . hammered in more cut more off shaft .and still couldn't pull the rest out . so i had to hammer it in until it fell out into third member .needless to say . i checked all the tolerances .and went through my pairs of shims . until i got the tightest fit .and could still tap pin in with hammer ,but yet still be able to get pin out . thanks for the replys . i will give it a shot . thanks again .

P.S. i hope it works . can't wait to try . all exited now SWEET!
 
Texican said:
You need to set it up again, and double check the air gap......If it were in the front I would intentionally set it up as tight as possible.

Mine in the front of Yeller is so tight I had to tap the cross pin in....no ratcheting at all in a year.

Butch


I like this approach too. I just recently setup both the lockrights in my little '40 this way. Works great, can't hardly tell they're even there (except for the four tires spinning thing going on...)


Mark...
 
Back
Top Bottom