July Tech day

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 13, 2020
Threads
53
Messages
1,054
Location
Richmond, Virginia
In May we had potentially discussed having a July tech day. One of the projects discussed for tech day was steering box rebuild and tapping for hydro assist. Is there still members interested in doing this for a tech day in July? If yes, please include dates that work for you.

July 11th, 18th, and 25th works for me.
I'm happy to host this tech day.

 
In May we had potentially discussed having a July tech day. One of the projects discussed for tech day was steering box rebuild and tapping for hydro assist. Is there still members interested in doing this for a tech day in July? If yes, please include dates that work for you.

July 11th, 18th, and 25th works for me.
I'm happy to host this tech day.


Is the “rebuild” hydro assist specific or is it a universal application?
 
I think the rebuild will include some good tech learning that will cross generations although there are some differences in specific steps I'm sure. Tapping for hydro is probably a little more specific but I think still a great tech day item as the skills of drilling and tapping are important to know!!
Sadly I cannot do any of those dates
I could do 19th or 26th in the afternoon but don't move it just because of me.
 
Thanks for posting Beach! This will be cool one to learn from
 
For planning purposes, if you are interested in this tech day, send me a date listed above that works best for you.
 
@Beach80 I am a maybe at this point. Depending on what I get done on my SAS TDL between now and the weekend will determine my attendance.
 
Kroil time

20260716_201519.webp
 
I am on call all weekend so have to stay close to home. Take lots of pics so people can at least see what is involved if they can not make it.

Good luck.
 
Are you putting in the 105 sector shaft? I do not think it would be needed with hydro assist.
 
Bummed I couldn’t make this one
 
FSM recommends stretching this Teflon ring before installing. The ring does feel like it wants to break if you don't BUT its easy to over stretch it. If you over strech it it wants to roll on inside lip. Super tight tolerance. A oring is underneath it too.

20260719_103809.webp
 
Back
Top Bottom