Do u happen to have an engine side harness for these ecu's??
For Sale JDM Ceiling compass/altimeter consoles and 5 SPD 1FZ ECU's for 80 series
- Thread starter TurboDennis
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
TurboDennis
SILVER Star
- Thread starter
- #22
I dont know whether you're genuinely clueless, or trying to trick me into accepting some sort of lowball offer, but posting misinformation like that in my thread is not very nice of you. NONE of those ECU's you posted a screenshot of on aussie ebay are comparable with the 2 that i have listed. These two are THE ONLY ones that will work correctly on a OBD2 M/T USDM truck with dual O2 sensors, and as far as i know, they have never been available in Australian market. (and i have never seen one for sale on Ebay) And as far as "the last few" that have been sold on mud for $200-225 - again, that's just pure LIES. There has never been one of these ECU's sold on MUD anywhere near that price.
Okay- that was just a cursory screenshot of what popped up today on ebay aus. each week theres a plethora of options.
Anyway- heres one my russian buddy is grabbing for me. Its 10,000 rubles - $143. 89661-60300
Are u starting to notice a price pattern yet?
Anyway- heres one my russian buddy is grabbing for me. Its 10,000 rubles - $143. 89661-60300
Are u starting to notice a price pattern yet?
TurboDennis
SILVER Star
- Thread starter
- #24
Does your russian buddy have a time machine? You realize that it sold in May, right?
The only pattern im starting to notice is you talking out of your ass.
I asked you for evidence to back up your claim that these ECU's "regulary sell in aus for $100" and also on mud for "200-225".
First you post a completely irrelevant screenshot from ebay aus (a market where these ECU's were never even available), then you post a screenshot of an ad from a russian site that has been archived since may (followed by another lie about your imaginary russian buddy). Seriously, just stop. If you need this ECU, you're welcome to go and find one elsewhere for cheaper (which you wont). Please stop trolling my thread.
Last edited:
aus is the largest secondary market buyer of jdm crusieers.( aside to ISIS of course 
)And id be very surprised if i dont see a bunch of Ecus with those 60300 or 340 pop up. I will forward you them so you can keep supplying the market here as im sure you are selling em like hotcakes and will need a resupply. 
I think the venezuelan market also got those ecus as well - and we know how strong that currency is atm
I just end up needing a good ol egr /smog stuff free m/t $80 one /steering clear of anything smog related on the 1fz.
)And id be very surprised if i dont see a bunch of Ecus with those 60300 or 340 pop up. I will forward you them so you can keep supplying the market here as im sure you are selling em like hotcakes and will need a resupply. I think the venezuelan market also got those ecus as well - and we know how strong that currency is atm
I just end up needing a good ol egr /smog stuff free m/t $80 one /steering clear of anything smog related on the 1fz.
Last edited:
TurboDennis
SILVER Star
- Thread starter
- #26
aus is the largest secondary market buyer of jdm crusieers.( aside to ISIS of course
I think the venezuelan market also got those ecus as well - and we know how strong that currency is atm
Great, thanks for all the tips. Im sure everyone looking for this ECU will find your input into this thread very helpful. Now we know that they are sold practically everywhere for ~$100 and a click away.
As i said previously - go troll somewhere else. There is a lot of other threads where you can join in and spread your wisdom. I see a lot of threads in this section where people would appreciate you pointing out that "You would be surprised if you didnt see a bunch of similar items come up for sale cheaper on the other side of the planet" (without actually ever seeing them)
Definitely- sorry to interfere in your lucrative stranglehold on fellow cruiserheads. and i will definitely pull down any posts of $143 ecus bearing the same number as this supply is sure to be drying up as you have cornered the market. and i will for sure forward you any sub $100 matching ones spotted in the aussie market.
Oh - also curious if you popped that really rusty one open to see if there was any water damage or other rusting on the motherboard??? It looks as if it was a third world frisbee for a short period of time.....and im worried it may have landed in a puddle.
Oh - also curious if you popped that really rusty one open to see if there was any water damage or other rusting on the motherboard??? It looks as if it was a third world frisbee for a short period of time.....and im worried it may have landed in a puddle.
Last edited:
TurboDennis
SILVER Star
- Thread starter
- #28
Look, if you came in here and said "Hey, i found an archived ad of ONE, single ECU with the same part number sell a very long time ago for $143 on some Russian website where i cant register or even contact the seller" Then i would've probably just ignored you. But you came in, spreading misinformation and downright lies along with your assumptions that have ABSOLUTELY ZERO factual basis and bear no relevance to this thread.
If you dont like the price, move on. Or make an offer via PM. But if you think that publicly posting lies and slander on a forum is somehow a service to "fellow cruiserheads", then give your f*ing head a shake.
no slander....people can draw their own conclusions
For Sale - 1991 HDJ81 VX Limited. Triple locks, ARB, Lifted, Importable to US, Toronto, Canada.
For Sale - 1991 HDJ81 VX Limited. Triple locks, ARB, Lifted, Importable to US, Toronto, Canada.
TurboDennis
SILVER Star
- Thread starter
- #30
What conlusions? Are you refering to the last post in that thread?
Well, since you're now into posting references to other idiots' posts, perhaps you should do a bit more research. So you dont look like a complete retard, you know? Oh wait, it's too late for that. But here you go anyway:
craigslist - 1995 3x Locked SoCal $27500
And look at the post #5, and compare the time stamp on it with the timestamp of the post you're referring to..
TurboDennis
SILVER Star
- Thread starter
- #31
bump.
lp2k
Had a couple of drinks.. saw a couple of things
Can you update the original post with what’s left and what’s sold , thanks
TurboDennis
SILVER Star
- Thread starter
- #33
I currently have 2 console sets, 2 visor sets and 1 ECU left.
lp2k
Had a couple of drinks.. saw a couple of things
Which ECU is left ? For a RHD or LHD?
TurboDennis
SILVER Star
- Thread starter
- #35
RHD. But the ECU's are exactly the same except for the mounting bracket. Your LHD ECU bracket will bolt up to the RHD ECU.
TurboDennis
SILVER Star
- Thread starter
- #36
One console set and one ECU left
Are any of the altimeters and visors still available? Do these visors also happen to fit into the usdm clips?
TurboDennis
SILVER Star
- Thread starter
- #38
Yes. I have one visor set and a couple of consoles. Visors are plug and play - fit the USDM clips and wiring connectors.
Ok. Great. Is the driver visor in good condition and doesn't drop after every bump?
TurboDennis
SILVER Star
- Thread starter
- #40
The visors came from a JDM truck, so the driver's side visor would be on the passenger side of the LHD truck. The left side visor (what used to be drivers side in Japan), does have a bit of sag. Right side visor has no noticeable sag.
Dennis
