Isspro problems?

[Glenn-BJ74]

I called PDR Diesel in Langley about ISSPRO gauges. They said they have been having reliability issues/ delays in getting Isspro parts and now are selling more Autometer .

Who out there has has problems with Isspro?

 

[Fantom]

I've had issues with my ISSPRO EGT gauge. I purchased it originally from ADP in Port Kells. When the issues started I dealt with ISSPRO direct and troubleshot it to a defective signal amp. They sent me a new one at no cost, no charge for shipping, direct to my place in a week. worked fine since then.

 

[WrenchMonkey]

Yeah I had a problem as well with egt, they fixed me up quick thst was after a few years though so I had to pay but they figured it out and it was at my box promptly.

 

[WrenchMonkey]

I'd deal with them directly they were very helpful for figuring out what would be best and what matched each other.

 

[Cruisin']

My Isspro EGT acts a bit weird and bounces around for the first several seconds on a cold start sometimes. Once I start driving it always levels out and seems to provide reliable readings, so I haven't contacted them for a fix. Perhaps I should...

The light in my boost gauge went out a while back too. That hasn't been dealt with yet as it requires most of my dash to come apart to remove the gauge.

The trans temp gauge has been bomb proof reliable.

 

[bj70_guy]

No problems with the Isspro boost gauge in the 74 yet.

 

[Glenn-BJ74]

Well the trigger got pulled - I ordered Isspro ATF oil temp, coolant temp, color banded pyrometer and 0-30 psi boost with the lighting wiring harness for the LED dimmer controller from eGauges - near Detroit. They are the EV2, but with white (not green) back lighting

Now where are they going to ??? The right A pillar is taken - the overhead console is hard to see driving - the lower middle console is taken - only place left is on top the dash

maybe 3 in this gauge pod and other well ... somewhere..?

 

[Fantom]

That is the same pod I used for mine, works great and is easy to mount.
https://forum.ih8mud.com/attachments/20140505_134536-jpg.893678/

 

[ForealBoreal]

no issues with the EV2 series here. I love mine.

 

[Glenn-BJ74]

I like the 'Darth Vader' look to that gauge pod ...

Darth Vader quote "The emperor does not share you optimistic appraisal of the situation" - get Isspro or pay dearly Luke .

 

[cruiserpilot]

Well the trigger got pulled - I ordered Isspro ATF oil temp, coolant temp, color banded pyrometer and 0-30 psi boost with the lighting wiring harness for the LED dimmer controller from eGauges - near Detroit. They are the EV2, but with white (not green) back lighting

Now where are they going to ??? The right A pillar is taken - the overhead console is hard to see driving - the lower middle console is taken - only place left is on top the dash

maybe 3 in this gauge pod and other well ... somewhere..?

View attachment 1126437

Please send link to purchase this pod with dial gauges, gracious. J