is it expensive to do an 1FZ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 13, 2007
Threads
14
Messages
200
Location
Houston, TX
I just want to set my budget for the future. My cruiser is burning two quarter every 3000 miles & I think it's close the time to remile it:whoops:. So, anybody can help with it? Is it to hard to do it by myself? I did once an 2F and an 3F as well, but no idea about this one:wrench:.
How much can I aproximately spend if a dealer do this engine?
Thanks guys!
 
I would just spend $6 every 3k on oil. ;)
2 quarts every 3k is less than the upper limit for "normal", which is 1qt per 1k miles. Some have use no oil between changes, but there are many who use 1qt every 1-3k miles, with no issues, other than pouring in some oil every month or so. Don't worry about it.
 
Be prepared for a hefty bill.

I would at least budget about $3000-$5000 at the very least for a full long b lock rebuild.

For comparison sake (sort of), I'm in about $550 total out sourced machine work/vat cleaning/injector cleaning, etc. alone; for OEM parts I'm at about $3800. This also does not include about $500 of exhaust work that I need to outsource and probably about another $100 in AC work that I am going to outsource.

Good luck.
-o-
 
Last edited:
Back
Top Bottom