Intro and tire question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 28, 2018
Threads
11
Messages
31
Location
Midland, TX
Just bought this 76 40 down the road from me. No plans at the moment other than tune up type things. It has Alcan springs on it. But unsure of height. Will 33 inch tires rub if I put them on?

154A4E3A-E5CF-4114-8AF2-0CC34751AB6D.webp
 
It has Alcan springs on it. But unsure of height. Will 33 inch tires rub if I put them on?

It depends - Alcan makes custom springs, however many inches of lift (or stock) that the customer specifies.

I have 3" lift Alcan springs on mine, and run 33" tires and they don't rub at all, even when articulated (although my rear quarter wheel openings have been trimmed by a previous owner).
 
Measure from the top of the axle tube to the bottom of the frame (ignore the bumpstop as you measure). My '69 FST measures 4 3/8" in the front, 8 3/8" in the rear with original factory suspension including shackles/bushings. My '74 with old school Rancho 3 leaf 2.5" springs with stock shackles measures 6 1/2-7" in the front and 10- 10 1/2" in the rear (just a little cruiser lean). This should give you a ballpark estimate of lift in your springs...
HTH,
Will
 
Back
Top Bottom