Intake/Carb question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

FineWynsFJ40

Too much to do...
Joined
Jan 13, 2005
Threads
84
Messages
1,377
Location
Grand Haven, MI
I have on my 1974 FJ40 (origional F, 125k miles) a GM Rochester 2-Jet, and aftermarket intake/exhaust manifolds from the previous owner. I get, on a bright and sunny day with a tailwind, 11 miles to the gallon. The power is nice, but at a severe economy cost. This is a stock cruiser other than noted above, but does see its share of trails during the summer. I am in the finishing process of restoring it, and it does run and drive great, but I want my fuel mileage back.

Should I:
1. Rebuild the carb and replace intake/exhaust manifold gaskets, or
2. Contact Vic of Hadley Industries and get stock Toyota intake/exhaust plus stock carb for it, or
3. Any other suggestions?

Please keep in mind that I'm a college boy, who doesn't like spending more than necessary but WILL fork over what is needed because he loves his cruiser and driving it more than his education... thanks. :beer:
 
Give Vic a call and return it to stock....


Then, get yourself a Jetta TDI, and drive that for mileage... ;)


Good luck!


-Steve
 
where do i find those toyota trail thingys? I don't know what they are... forum, magazine, etc...? What did he say about them?
 
My dad's friend has a bone stock 71 with 450,000 origional miles on it, and it gets upwards of 17-19 mpg. Of course, his is leaded and mine is not, but that shouldn't make that much of a difference, should it? My elevation (I don't know if this will matter) is about 900 ft.

Since I'm not a member, could somebody get me a copy of the article please? :)
 
J O I N___t H E___t L C A!!!!

FineWynsFJ40 said:
where do i find those toyota trail thingys? I don't know what they are... forum, magazine, etc...? What did he say about them?



TLCA newsletter/mag..


BEST MONEY I HAVE SPENT ON MY LAND CRUISER....EVER, PERIOD.



JOIN!


See the add on the right side of your screen?
 
If, and that is a big IF, your rochester is running ok, then start with a vacuum advance distributor. It's a great improvement over the stock 74 dizzy.

You don't say if you have a manifold or header for the exhaust, but if you have a manifold, a header would be a big improvement in power AND economy.

If you find you still can't budge the MPG from 11 with these two upgrades, THEN you can blame the Rochester! ;p
 
I don't have a vacuum advance distributor, but do have headers. I'm thinking I'm going to give Vic a call... I'll keep the carb and stuff in case I want to change it back, but I doubt I'll change back if I swap 'em.
 
Back
Top Bottom