Instrument Panel

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 19, 2006
Threads
93
Messages
1,386
Location
Tucson
I have no lights on the left instrument panel. I checked all the bulbs and changed out 2 of them. I have voltage on at least one pin of the connector when I pull the light switch out, and voltage on none when the switch is off, so I know some voltage is getting there.

Does anyone have any ideas, or at least a pin/voltage schematic or diagram?

BTW, it is a 74 piggy
 
fuses and bulbs both come apart with age,, they will look fine and pass some current but not enough for the circuit,,, start with the simple stuff, replace all the bulbs and fuse if you havent yet.
 
Back
Top Bottom