Induction service

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 18, 2005
Threads
30
Messages
326
Location
Central Florida
Hi, looking for info about this process for a do-it-yourselfer? I have the canister tool but do not know where/how to hook it up. 94FZJ80. (yeah, its really fuel injected even though the parts dunce at dealership insisted my truck was carbureted!! lol)

Thanks, ChuckD
 
Welcome Chuck.

We have lots of resources here. on the main 80 page there is a thread below the announcements titled FAQ for 80/lx450 series. Lots of threads in the maintenance section on what you ask, but I would start in the geneal section to familiarize yourself.

Additionaly, In the masthead, there is a search function, click on that, select the advanced tab and then highlight the 80's fourm. Type in your key words. If you need to narrow it down, select key words in title.

Don't hestiate to ask questions, but it is nice to look over the available info first. to help you better understand how to ask the questions.

The ting you want tp focus on is first baseline the truck

then check the front axle and follow the front axle thread in the maintenance section of the FAQ
 
Romer, thanks for the direction. I've found lots of good info reading through those FAQs but is there really specific info about the induction service? can't find it. This is where they hook up the hose to diff locations to TB (I assume) and run a chemical through. $99 at the dealership.

ChuckD
 
Back
Top Bottom