Identifying GM steering column

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

GeoW5

SILVER Star
Joined
Jul 31, 2019
Threads
36
Messages
228
Location
Swansboro, NC.
All

I have GM steering climb that I need to identify so I can install a steering wheel with a horn. Any ideas of how to ID it? I also want to redo the wiring.
 
Here some pics to include the engine compartment to the steering fluid pump. Not sure if it’s a Saginaw or not.
AFA419D8-66D3-4BBA-82C5-0BAD878164C6.webp
FFB3BDF9-848F-43C9-9A76-9ABFB8A211B1.webp
7E94E1A7-09E4-4602-918D-D1A425CA6D54.webp
5CE84643-8386-497F-8B0B-84B5AB333D39.webp
EE018FED-8A7C-47CF-A9B4-D5D2E09216C3.webp
FFB3BDF9-848F-43C9-9A76-9ABFB8A211B1.webp
EE018FED-8A7C-47CF-A9B4-D5D2E09216C3.webp
 
Looks a lot like a 70's Camaro steering wheel.
 
You may be able to use the stock horn pieces and just run the wiring up the bottom of the column. Are the turn signals hooked up?
 
You may be able to use the stock horn pieces and just run the wiring up the bottom of the column. Are the turn signals hooked up?
The center For what we would consider the horn doesn’t seem to push down. In other words, it is not a spring-loaded center cap. It just snaps into place. I think the turn signals are hooked up they seem to be kind of work in the other day but there are some loose connections within the steering column itself or the turn signal switch itself.
 
Back
Top Bottom