HZJ75 Parts needed

[tractor dr]

Location

United States

I am in need of a Front drive ujoint and rear spring bushings for a 1999 HZJ75LV-MR Land cruiser. I cannot seem to locate any part numbers or suppliers here in Illinois. ( Unit is at a mission in Haiti and I am trying to locate parts to send there.)

 

[crushers]

ENS toyota Saskatchewan
Mot on the site here
Japan 4X4 on site here

 

[roscoFJ73]

I am in need of a Front drive ujoint and rear spring bushings for a 1999 HZJ75LV-MR Land cruiser. I cannot seem to locate any part numbers or suppliers here in Illinois. ( Unit is at a mission in Haiti and I am trying to locate parts to send there.)

Dealers will only have part# for vehicles sold in that country.
I think the uni joint is the same as earlier 60 series and Hilux//4runner

 

[Z()LTAN]

do you have a Coventries or something like that over there?

 

[tlcruiserman]

I am in need of a Front drive ujoint and rear spring bushings for a 1999 HZJ75LV-MR Land cruiser. I cannot seem to locate any part numbers or suppliers here in Illinois. ( Unit is at a mission in Haiti and I am trying to locate parts to send there.)

I am pretty sure the front drive ujoint is the same in 99 as 97-98, it is the smaller ujoint used on all of the newer ones with the front high pinion. I will get the part number for you tomorrow when I am back out at my shop. I might have this in stock.

As far as the rear bushings which ones are you talking about the rear rear or front rear bushings, I may also have those as well they should be the same as earlier models are you looking for rubber or poly?

Cheers,

Michael

 

[crushers]

sorry Mike, i forgot you have quite a stash of 70s parts as well...

 

[tlcruiserman]

sorry Mike, i forgot you have quite a stash of 70s parts as well...

No worries Wayne

 

[tractor dr]

Thanks for the response. I Need front bushings on the rear springs. could also use the pins. Will be checking back Thanks!

 

[tlcruiserman]

Thanks for the response. I Need front bushings on the rear springs. could also use the pins. Will be checking back Thanks!

I was checking in my suspension books and I am assuming your 1999 is prior to 09/1999 from that point on they were HZJ79's if it prior to that date I have bushings, and rear greasable pins for your truck if it is newer they will be different. An easy way to tell is does it have front leafs or front coils?

Cheers,

Michael

 

[tlcruiserman]

I was checking in my suspension books and I am assuming your 1999 is prior to 09/1999 from that point on they were HZJ79's if it prior to that date I have bushings, and rear greasable pins for your truck if it is newer they will be different. An easy way to tell is does it have front leafs or front coils?

Cheers,

Michael

Universal Joint part #'s (Toyota):

Front = 04371-60070
Rear = 04371-36030

These are the same ujoints that are used on the 93-97 USA FZJ80 so any decent Toyota Dealer should have these in stock.

Here is a pic of Rear greasable pin and bushings


Cheers,

Michael

 

[roscoFJ73]

do you have a Coventries or something like that over there?

Of course they have something like that,but as no diesel or 70 series was sold there, no one keeps parts or parts manuals.
Like trying to buy parts for a Ford Thunderbird here

Coventries,dont tell me you go there Try 4WD Parts in Welshpool 1st

 

[tlcruiserman]

Of course they have something like that,but as no diesel or 70 series was sold there, no one keeps parts or parts manuals.
Like trying to buy parts for a Ford Thunderbird here

Coventries,dont tell me you go there Try 4WD Parts in Welshpool 1st

I have to second that "Buy parts at 4WD Parts in Welshpool" I even buy parts from them, the guys are great

Cheers,

Michael

 

[roscoFJ73]

I have to second that "Buy parts at 4WD Parts in Welshpool" I even buy parts from them, the guys are great

Cheers,

Michael

Have you been there? The office is like 4'x5' and has parking for 3 cars.
Dave has some really nice 75 series door trims made locally,I think Dave T got some.
I got most of the gear for my 1HZ into the 73 series conversion from there

 

[tlcruiserman]

Have you been there? The office is like 4'x5' and has parking for 3 cars.
Dave has some really nice 75 series door trims made locally,I think Dave T got some.
I got most of the gear for my 1HZ into the 73 series conversion from there

I have never been there just had product shipped to me. I told Dave next time I get down to OZ I will try to make it over to Western OZ (I am usually in Caloundra, Queensland).

Cheers,

Michael

 

[tractor dr]

Thanks for the numbers for the ujoints .
What is the OD of the bushings ? Mine measured 1 5/8" or 41MM Which was bigger than any I have found listed. '

Universal Joint part #'s (Toyota):

Front = 04371-60070
Rear = 04371-36030

These are the same ujoints that are used on the 93-97 USA FZJ80 so any decent Toyota Dealer should have these in stock.

Here is a pic of Rear greasable pin and bushings


Cheers,

Michael

 

[tractor dr]

The pic is of the Rear spring pin and bushing. ( the old one is what I removed ,the new one in the pic is a front bushing which is too small OD.

 

[Japan4X4]

Use caution, the rear spring pins and bushing on the 75 are larger than all the other 70s.

Ask me why I know this

 

[tlcruiserman]

Use caution, the rear spring pins and bushing on the 75 are larger than all the other 70s.

Ask me why I know this

Yes I am aware of this, and since I stock and sell these parts the ones I sell are correct.

 

[tlcruiserman]

Thanks for the numbers for the ujoints .
What is the OD of the bushings ? Mine measured 1 5/8" or 41MM Which was bigger than any I have found listed. '

Next time I am at my shop I will measure.