how to remove rust from a rollbar

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 24, 2006
Threads
6
Messages
12
I recently purchased a rollbar, it has some surface rust on it along with some pretty good rust at the base of all 4 legs. What is the best way to clean to surface rust off, and would i be better off cutting the legs off and welding on new supports
thanks for your help
john
 
Post up a pic of the rust....


Any rust on tube is not a good thing, especially if you are referring to the stock junk tin foil tube affair that Toyota calls a roll bar.
 
Sandblast is the only way to go...if it's structural, def cut/weld.
 
Poser said:
Post up a pic of the rust....


Any rust on tube is not a good thing, especially if you are referring to the stock junk tin foil tube affair that Toyota calls a roll bar.

This is Steve's subtle way of saying he doesn't think much of a stock rollbar! :D


I'd wirewheel it off, myself, then POR the sucker. But my sandblaster is cabinet only.
 
No reason to feel like a loser.

The stock bar is somewhere in the area of .070 wall thickness…which is garbage to say the least.

There are ample pictures in threads out here showing what happens to a stock bar subjected to a rollover.


If you ever see yourself possibly being in a situation that rollover protection may be needed, the absolute last thing that I would want over my head would be a stock Toyota Land Cruiser roll bar.


At least on the CJ’s, Jeep had a structurally sound, welded roll bar, instead of this bolted together turd that Toyota installed after 09/73 in the 40 series.


-Steve
 
Poser said:
No reason to feel like a loser.

The stock bar is somewhere in the area of .070 wall thickness…which is garbage to say the least.

There are ample pictures in threads out here showing what happens to a stock bar subjected to a rollover.


If you ever see yourself possibly being in a situation that rollover protection may be needed, the absolute last thing that I would want over my head would be a stock Toyota Land Cruiser roll bar.


At least on the CJ’s, Jeep had a structurally sound, welded roll bar, instead of this bolted together turd that Toyota installed after 09/73 in the 40 series.


-Steve

so steve, are you saying you can't polish (or sand) a turd? :D
 
Back
Top Bottom