How to connect an ARB line to a 1/4" npt fitting

[78-FJ40]

I want to run an air guage into my cab by using the blue ARB line, but I need to somehow connect that to a 1/4" threaded npt fitting. Is there such a part or do I need to buy the fitting that ARB uses to connect the lines to their compressors?

Thanks

 

[450 DUDE]

The local hardware / auto parts store should have what you need.
Compression to pipe.

Im ass uming that the arb line is flex tubing.

 

[cruiseroutfit]

The ARB bulkhead fitting (that usually goes in the diff) is a 1/4" NPT

You would need (ARB Part #'s)

170602
170603
170601
170608
170605 (1/4" NPT)

~$10 from an ARB dealer... might be more or less at a hardware store assuming they have the parts for a 5mm line.

 

[cranky steve]

blue line is compatible with 3/16" compression. It's a bitch to find! Try Inchworm, they stock ARB Bits and pieces

 

[honk]

Both our Ace and our True Value hardware stors stock both 1/4" and 3/16" flare and compression fittings in all shapes and forms. No metric sizes though.

 

[Poser]

blue line is 3/16" compression. It's a bitch to find! Try Inchworm, they stock ARB Bits and pieces

ARB blue air line has always been 5mm.

 

[cranky steve]

ARB blue air line has always been 5mm.

Yep, and 3/16" will work fine as well

 

[alia176]

This picture may help. I used a BSP to NPT converter but you get the idea.

Cheers,

Ali