High beam switch boot

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 26, 2017
Threads
54
Messages
555
Location
Dfw
Iv looked to see if there was anything on “how to’s” make these boots. I think I’ve come up with a temporary solution until someone way more skilled than me makes a more factory looking boot

I was not hard, and not expensive. The only thing I had to buy was a product called “ Pasti Dip”... got it at hf

So all I did was hot glue Romex on the side of 27mm socket. Dipped it in the plasti dip 3-4 times letting it dry each time. Once dry I slowly pealed it off the socket, cut it to size and install. I have no idea how it will hold up, but it’s no big deal to remake, even if I get a year out of it, it’s got to be better than nothing

image.webp


image.webp
 
Very cool invention! I’ve dipped the remnants of old rubber boots (the front drive vacuum switch boot) in plasti-dip to “restore” them back somewhat to shape but never thought of making one outright out of plasti-dip. Keep us status’d on its longevity.
 
I just brushed the terminals directly. I used plasti-dip on my bugcatcher window w/s to fill in gaps and trimmed to finish. Done it twice now in the 25 years I’ve had the truck. Really need to get around to installing the replacement w/s I bought from Cruiser outfit
 
I just brushed the terminals directly. I used plasti-dip on my bugcatcher window w/s to fill in gaps and trimmed to finish. Done it twice now in the 25 years I’ve had the truck. Really need to get around to installing the replacement w/s I bought from Cruiser outfit
I think your method would give a better seal for sure! What I was attempting to do was create something that looks like a factory boot. It was not as close as I’d like it to be, but I felt my idea was worth posting. Here’s my hope. This inspires more conversation, more ideas, more input.
 
Back
Top Bottom