HGasket flick - Help Needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 13, 2007
Threads
70
Messages
592
Location
Seacoast NH
I always thought threads like this were a bit odd, but here I am making one.

Does anyone know the whereabouts of IdahoDoug?

My head blew one week ago today and I quickly sent payment for a HG DVD that evening.

However, I haven't heard any word from IdahoDoug's side and, from his user profile, he hasn't been active for the last 10 days. I do hope he is alright and perhaps traveling or something.

I don't mean to publicly make IdahoDoug look bad for not delivering instantly (I even titled this thread without the normal keywords so that it is less likely to show up in a search for "Head Gasket DVD"). I know this is something he does on the side and he is entitled to take as much time as he pleases.

I'm posting this as I'm ready to start digging down to the gasket this weekend (the hood is off, throttle body removed etc.), but I really want to watch the video first so I don't make any goofball mistakes and/or make more work for myself.

Alternatively, if anyone would be willing to loan me their DVD, I will PayPal you postage/handling and will send it back as soon as I am done.

Again, I feel a bit odd posting this sort of thread, but if any of you could give me some insight as to IdahoDougs whereabouts or lend me a DVD in the meantime, that would be great.

Thanks, All.
 
I'm sure the DVD helps, otherwise it wouldn't have gained such aclaim around here but the job isn't that bad with just the FSM. I don't know if his DVD covers this but you don't need to pull the heater valve off. Other than that I didn't run into any hicups following the FSM. Only thing is that the FSM has you pull the head off with both manifolds still on. I used my engine hoist and it wasn't a problem but I could see trying manualy lift that load out as a real pita.

Hope things go smoothly and you get your DVD. :cheers:
 
i have some tips for you before you go to far...if you need help i should be around sunday and next week i will pm you my cell # give me a call
-Nat
 
Doug must be busy. I got mine from him three weeks ago, if you want I can send it to you for now and you can either mail it back to me once you get yours, or you can have Doug mail me your copy directly which ever works for you... PM me with your address if you still need it badly.
 
The DVD does help a good bit. Just gives some good tips and tricks that might not pop out at you if you didn't watch it first. I found it to be extremely helpful. But that's just me...
 
Doug must be busy. I got mine from him three weeks ago, if you want I can send it to you for now and you can either mail it back to me once you get yours, or you can have Doug mail me your copy directly which ever works for you... PM me with your address if you still need it badly.

Thanks, WXM! That's a great offer and I'd like to take you up on it! I'll PM you my address. I think I saw in your profile that you ride a fixed gear Bianchi. I've got a couple nearly new fixed gear cogs that I could send your way as a thank you.

As others have done, I could surely plug away with the head gasket job with the support of the FSM, but I think the job would turn out to be more informative and the work would flow more confidently with the aid of the DVD.

Bear80, Nat and badmuthatrucka, thanks for your advice. Nat, I'll give you a ring about the tips and the possibility of borrowing that torque wrench.

I've mentioned this before, but I have been really encouraged and gratified by all the support thus far. Thanks.
 
Last edited:
Doug sends a DOC file with additional tips, tools, and other things. PM me if you need that document. He sent me an update a couple of weeks ago.

-B-
 
Doug sends a DOC file with additional tips, tools, and other things. PM me if you need that document.

Thanks for looking out, Beowulf. I'll shoot you a quick PM with my email address.

:cheers:
 
I got the document, B. There are some good tips in there and it shows IdahoDoug's enthusiasm to relay the most comprehensive and current info.

Thanks again, Beowulf.
 
Hey Chaldaean,

Great that you got the tip sheet from Beo - that's what I'd have sent you electronically as well to get you started. And thanks Beo for stepping in to help. I've indeed been out of town for 10 days. Unfortunately for a funeral in California that was completely unexpected. A second father for me and my best buddy's father. Dead at 63 - way too young.

We drove the Cruiser down and just got back at 4:30 this morning after driving all night. Literally parked the fully packed truck in the garage, walked upstairs and the 4 of us were asleep in minutes. I think you're set based on the PMs we exchanged a couple hours ago and thanks kindly for letting me know you don't need me to rush it if I need time to decompress. It will go out tomorrow (Monday) along with some others also ordered while I was gone.

Hope you are all well and just a reminder to call people you love and tell them so, because you only realize how true it is that they can go at any time when someone in fact dies. Too late then, so do it now. Peace out.

DougM
 
Right on, Doug. Thanks for the quick attention and I will surely give heed to your reminder.
 
Back
Top Bottom