HG repair in progress ... pic

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2007
Threads
10
Messages
83
Location
Knoxville, TN
After believing that I had blown my HG yesterday, I went ahead and got to work on fixing it. CDan overnighted me the parts, IdahoDoug overnighted me the DVD ... thanks guys.

Anyway, how's this for evidence of a blown HG:

viewFromExhaustPort.jpg
 
What symptoms did you personally notice for you to suspect HG failure? Did you know the definitive moment when it failed (ex. towing) or did it creep up slowly (ex. you noticed a leak getting bigger)? Thanks for sharing your observations.
 
171,000 when it blew. Nothing weird about the driving, just normal drive to work.

RE: the blown area, I don't yet have the head off, but once I get there I'll be sure to post more pics.
 
Archie -- it was a drastic and obvious failure. Driving about 65, the engine started to "lurch" ... almost like a flat-tire feel. Then, tons of white smoke, raising temp, etc. I pulled over immediately, smelled coolant in the exhaust, and frowned. Of course it was raining like crazy, which made it even better.
 
Here's how she sits at the end of Day 1:

endDay1.jpg


Tomorrow I'll get started on the intake plenum, fuel rail/injectors, camshafts, then the head.

I've never been inside one of these before, but those camshafts sure look gunky ... what do you think?
 
FWIW mine had considerably less gunk when I replaced the valve cover gasket..It was more of a golden brown color, the valvetrain assembley that is..Mine is at 200k...
 
It has been leaking around the valve cover for about 10000 miles, but not too much. I'm about to pull the camshafts out and I'll get a better look.
 
Well, I'm expecting the get the head back from the shop tomorrow, and the injectors back from service also. Then I'll start putting her back together this weekend.

In case you're interested, here's what the guts looked like:



gasket.jpg
pistonView.jpg
 
What has been the hardest part so far?

For me it was getting started. Looking down on that engine and trying to imagine what was ahead made taking out that first bolt kind of hard. Then after 4 hours and crap laying all over the place it really didn't matter any more.
 
Yep, It's like jumping in a cold river. Your nuts shrivel just thinking about it, but after you get started, it ain't so bad. To qoute my mechanic brother, "What are you so worried about, it F__king unbolts and then F__king bolts back together, grow some testicles!" It's such a mechanical marvel in there I almost didn't want to see it go back together.
 
Believe it or not getting the vacuum hoses off was the biggest pain I've had so far!!

My biggest fear is that one of my kids are going to mess this up:

nutsnBolts.jpg
 
It's such a mechanical marvel in there I almost didn't want to see it go back together.

Maybe someone needs to make a clear cover for the valvetrain so we can watch it in operation!

452_Hemi_2.jpg
 
Believe it or not getting the vacuum hoses off was the biggest pain I've had so far!!

My biggest fear is that one of my kids are going to mess this up:

nutsnBolts.jpg

You need to got to the kitchen and swipe some zip lock sandwich baggies. Thataway they can play catch with the parts if they want to. JUST REMEMBER - THERE HAS TO BE ONE BOLT LEFT OVER, IF NOT, IT'S LOOSE INSIDE THE ENGINE. :D
 
I want to see the picture of that clean off block :D.

May be able to get a kitchen pass tomorrow night if you're getting back to it. I've kind of planted the seed with the ole lady. Let me know what your plans are looking like.

:beer:
Rookie2
 
Back
Top Bottom