HELP, Replacing Quarter Window Chanel Run

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 24, 2019
Threads
118
Messages
1,094
Location
Folsom, CA
I need some advice here.

I just purchased a set of quarter window chanel runs. It looks like it is possible to pull out the chanel and replace it without removing the whole quarter window assembly? I don't want to damage the window glass.

Thanks.
 
To clarify I am taking about the rubber chanel that the windows slide on. Not the larger piece of rubber that holds the window in.
 
If you can pull it off, I’d be interested in seeing it.
 
I replaced everything but the glass on both sides. There are 2 small screws on either side of that vertical piece that's hidden by the rubber window stripping. @OTRAMM has a video (what hasn't he videoed!) On his YouTube channel pulling out the assembly and taking it a part to install gullwings. Take a look at that for a visual. Also, my aluminum frame was completely corroded on each side and had to be replaced. These were not cheap.
 
Back
Top Bottom