Help New owner!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I would start with basics like change all of your fluids, spark plugs, spark plug wires, distributor cap, pcv valve. Replace your vaccuum lines as recommended most likely there are some that are dry rotted. We do receive a discount on parts and service at Fred Anderson Toyota if you are a member of ONSC. So I would get parts from there and we can all get together sometime and knock this out. I know some of the other guys in the area probably have some things that need to be done as well. I know I need to take my snorkel off and put in some riv nuts in the A pillar that I have been putting off.
That would be cool to knock it out. Think I should go to a local Toyota and see if the will check out the vehicle. Do a compression test all of that? Or buy the tools or cross my fingers? Lol
 
That would be cool to knock it out. Think I should go to a local Toyota and see if the will check out the vehicle. Do a compression test all of that? Or buy the tools or cross my fingers? Lol

Toyota is going to charge you significantly most of the things to baseline you can do yourself in your driveway or garage. If there is a specialty tool you need you can usually borrow if for free from Autozone or another parts store (they do hold a deposit but refund it when you return the tool) start compiling the parts and like I mentioned some of the other club members and myself can help you knock it all out.
 
Toyota is going to charge you significantly most of the things to baseline you can do yourself in your driveway or garage. If there is a specialty tool you need you can usually borrow if for free from Autozone or another parts store (they do hold a deposit but refund it when you return the tool) start compiling the parts and like I mentioned some of the other club members and myself can help you knock it all out.
Right I was also wondering where the most cost efficient place to buy parts would be?
 
I am not sure of who the go to is in Greeneville for the Upstate Guys.
I was going to ask you are the hoses special or can I buy them at a local advanced? Like the pcv hose and booster vac line? Do they have to be formed or is it just standard hose I can have cut ?
 
Guys........no one told him about "Cup Holders" !
Are you keeping it for later ?
Shouldn't this be a super important part of baseline-ing ?
How will he do anything without "Cup Holders" ?
Is he even allowed to post without them ?
 
Took my eyes of the road for a second ended up hitting a curb going 20 mph . If I didn't need an alignment before I will now..:/
 
GUYS I HAVE TO SAY. I found myself driving the cruiser today instead of my little Tacoma because of my dog and WOW IM IDDICTED . So fun to drive. I have driven many things before but this is really enjoyable. Found myself looking for more errands to run! Lol
 
If you need assistance contact Marshal @Trollhole . He is your go-to if you need things done with your cruiser that you aren't comfortable doing yourself.
 
Last edited:
IMG_0338.webp
IMG_0331.webp
Doh!

Please say you didn't spill any beer
 
PCV hose
Brake booster hose
Charcoal canister hoses

Each cause their own issues if cracked or split.
 
Back
Top Bottom