Help needed with 1hdft injector pump

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 4, 2019
Threads
1
Messages
1
Location
East Africa
Hi,

I recently purchased a 1995 LC with 1hdft engine, vehicle runs well but makes a ticking noise when in movement, tappets and rockers serviced but no change..the mechanic noticed that the injector pump is sitting on advanced..not sure why? I’m too scared to get the current setting changed.. any advise would be appreciated. Thanks!
 
Can you get a video of the sound? I know that my 1HDT makes a ticking sound and, from my research, mysterious ticking sounds seem common on the 1HDxx series engines.
 
Being my first diesel, I get scared and assume all noises are going to be an issue. Having never listened to another one in person doesn't help either. The Youtube video below is mine after making all those adjustments myself. I'm not claiming it's right, but it's run like that faithfully for a couple years now, and my Blackstone oil reports have been positive, so it at least gives you an idea of the noise. I think the fact that these are basically old tractor engines, means they sound and feel like an old tractor engine. It's character.

As for timing the pump, assuming I did it correctly, it was a fairly easy job with the correct tools. The FSM procedure lays it out well, but you need the SST and a suitable dial to follow it properly. I found the tool on ebay for a hundred bucks, but I've read that others have had luck using a magnetic base on the filter and some extensions. There are many posts to be found on here regarding timing adjustment on the 1HDT, but procedure appears to be the same on the FT. Actual measurements may be different though, so make sure to get a copy of the right fsm. I can email a copy to you or something if you want. The link below is to the specific post in my build thread about the timing adjustment, with photos and such.

Builds - Mail Order Ride - My HDJ81

 
Back
Top Bottom