Help needed identifying sensor

[Tanner Gonzales]

Removed head for head gasket and broke a sensor plug and sensor head,

The sensor with the black housing closest to the water outlet neck, for some reason having trouble identifying in the wiring schematic.

 

[Tanner Gonzales]

Sorry guys I found it it’s the water temp sender for the gauge.

 

[flintknapper]

Here:

Just be careful not to knacker your knock sensors, they are expensive to replace.

 

[Kernal]

FWIW (if you do break a knock sensor) O'Reillys sells a Made in Japan part that is identical to the original knock sensors, $40 each. It's from their Import Direct line of parts. Much easier to replace all the sensors now. The plastic gets very brittle with heat/age.

 

[Spdstr280Z]

FWIW (if you do break a knock sensor) O'Reillys sells a Made in Japan part that is identical to the original knock sensors, $40 each. It's from their Import Direct line of parts. Much easier to replace all the sensors now. The plastic gets very brittle with heat/age.

Oh really ? Every other sensor on my engine is new Toyota as it is getting put back in, but due to the cost and that they don't seem to fail too often, I have not replaced the knock sensors. May have to look in to these...

Thanks,

Jason

 

[Tanner Gonzales]

Thanks guys.

-Tanner