HELP - Auto Tranny problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 3, 2008
Threads
2
Messages
4
Hi there,

I have been installing an extreme valve body on my 1996 VX 80 Series 1HD-FT with a A442F auto tranny.

As I dislodged the valve body, two springs fell out. I did not get the chance to see exactly where they came from as I was not expecting them. They are 10mm in diameter, one is 30mm long and has green paint, the other is 36mm long and has purple paint on it.

The springs reside in the C2 and B2 accumulator pistons in the casing of the transmission. There is no guidance in the Toyota manual or the transmission book that a Toyota mechanic spent some time discussing with me.

This was not highlighted in the instructions that I received. I have called Toyota in Brisbane and have received an exploded view of the parts in the region and this was on minimal help.

I am a bit perplexed as the seller of the valve body is on leave (lucky man) and I would like to get my 80 on the road again this week.

Is there anyone out there who would be able to advise me as to which spring is inserted into which accumulator piston or if there is a page from a good book that could be scanned and emailed to me?

Email is: valdad@bigpond.com

Thanks in advance and cheers for the new year,

Sean

11/96 HDJ VX 1HD-FT
Brisbane Australia
 
Sorry about your frustrations, Im no help at all. Im am curious about your valve body though. Where did you get it?
 
Does the picture about half way down their page help?
Wholesale Automatic Transmissions Looks like the springs here(?) but I have NEVER been into one.
a442f_19.webp
 
Last edited:
I had the B2 spring fall out but not the C2, that would have freaked me even more than the fact that the diagrams show some sort of insert in the base of the spring in the B2 that I couldn't find. Turns out some have an insert and shorter spring, or no insert and longer spring!

Anyway, I bought any publication that mentioned 442F and the one that holds the crucial information you need is a 1995 supliment to RM314E.

The purple 10.8mm x 37.7mm goes in C2

The green should be yellow and 11mm x 30.4mm, goes in B2 (you have no insert right?)

If you had an insert in B2 then the spring would be blue and 11mm x 26.7mm (for the benefit of future searchers)

I have RM314E scanned but not this suppliment. I'll try and scan the important page if you want to confirm with your own eyes?

Jon.
 
Wildsmith,

Thanks for this information. Could you scan the page for me and send it to

valdad@bigpond.com

I had anothe LCOOL'er send me his instructions and he had some more scrawls on his than mine. These scrawls mentioned purple and yellow - discoloured = green!!

Others have helped as well but y are on the money.

Rodney is on leave, I have the picture mentioned.

Thanks for your help.

Cheers for the new year,

Sean.
 
I've sent an email to you with that page of the supplement so let me know if you don't get it soon. Having both springs loose as well as re-fitting the throttle cable and not dislodging the 4 little gaskets while holding the valve body up and getting some bolts in is going to make re-assembly a handfull so I'd get some extra hands to help if you can!

Jon.
 
Last edited:
Back
Top Bottom