Heater Hoses

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm running the HCV in my 1992 from AutoZone. Similar can be purchased from O'Reillys and Napa. Numerous guys have used the non Toyota HCV. They are about $20. I couldn't bring myself to pay that much for the OEM. I've been running the one in my 1992 for about 5 years...
 
The OEM molded hoses are pricey. Expect to pay $20+ each and there are several of them. I was able to get a few gates molded hoses (for other applications) and cut out the pieces I needed for about 1/3 the price. Some people say only use OEM but I've used gates on every car I have owned, some with more than 400,000 miles, and never had a failure.
How many molded hoses are there?
 
I'm running the HCV in my 1992 from AutoZone. Similar can be purchased from O'Reillys and Napa. Numerous guys have used the non Toyota HCV. They are about $20. I couldn't bring myself to pay that much for the OEM. I've been running the one in my 1992 for about 5 years...
This is finally a bit of good news, thanks
 
I wouldn't use silicone heater hose. It is difficult to get a good seating and tough to seal. There was a recent thread regarding silicone hose on a PHH replacement. It lasted about 20k miles and sh!t the bed. Personally, I look at it this way. There are places to cut costs and there are places not to cut costs. I don't cut costs on heater hoses and belts. I did on the HCV because money was really tight and I NEEDED it right away. I took a chance knowing that it may not last. The only way to hope to get a good seal with silicone hoses is to use content tension clamps like the breeze clamps. Those clamps are pretty damn expensive which negates the savings on the hose. Oh, and silicone weeps. Coolant expands when it gets cold, which it does in parts of Misery. I wouldn't risk it. But OEM for the molded hoses. NAPA Gold for the non molded.
 
I wouldn't use silicone heater hose. It is difficult to get a good seating and tough to seal. There was a recent thread regarding silicone hose on a PHH replacement. It lasted about 20k miles and sh!t the bed. Personally, I look at it this way. There are places to cut costs and there are places not to cut costs. I don't cut costs on heater hoses and belts. I did on the HCV because money was really tight and I NEEDED it right away. I took a chance knowing that it may not last. The only way to hope to get a good seal with silicone hoses is to use content tension clamps like the breeze clamps. Those clamps are pretty damn expensive which negates the savings on the hose. Oh, and silicone weeps. Coolant expands when it gets cold, which it does in parts of Misery. I wouldn't risk it. But OEM for the molded hoses. NAPA Gold for the non molded.
I have heard of the issues with silicone, doesn't sound good. I will see if I can order the molded hoses today.
 
Yes to the napa gold, which ironically some napas do not carry in stock. Another good option is the gates green stripe, which can be bought in bulk or sections from many outlets and vendors here.
 
Yes to the napa gold, which ironically some napas do not carry in stock. Another good option is the gates green stripe, which can be bought in bulk or sections from many outlets and vendors here.

My understanding is that Napa Gold is Gates Green Stripe private labeled for Napa (with a gold stripe...)
 
Anybody use the OEM spring clamps with Gates green stripe? They barely fit over the hose and I worry there would not be enough clamping power.

Personally I really like the OEM clamps in the tight areas.
 
Anybody use the OEM spring clamps with Gates green stripe? They barely fit over the hose and I worry there would not be enough clamping power.

Personally I really like the OEM clamps in the tight areas.

My preference is the screw drive Toyota clamps. They make various sizes. And they are cheap!

On vacuum lines I've used the OEM spring clamps on non OEM hose.
 
My preference is the screw drive Toyota clamps. They make various sizes. And they are cheap!

On vacuum lines I've used the OEM spring clamps on non OEM hose.

Thanks, I'm talking about this style.

image.webp
 
I've used em. No leaks after about a year.
 
I've been using silicone hoses for years with no issues. I wouldn't right them off because of user error.
I don't believe I was suffering user error, but I would never use silicone again.
 
I've been using silicone hoses for years with no issues. I wouldn't right them off because of user error.

Weeping isn't based on "user error" but an inferior product for use with oil or coolant. The theory of silicone is great. The factual data of silicone is not. Silicone weeps. Rubber doesn't. I see no point in spending more money for an inferior product.
 
I'm happy with rubber hoses. I ordered a bunch of OEM hose clamps today. I'll play it by ear when they come in.
 
Correct. If you don't count the higher permeability of silicone (15x as much moisture allowed through it) and the poor resistance to acid than sure, silicone isn't inferior to EPDM hose...

Last I checked, clamps don't keep coolant from leaking out through a hose...
 
Back
Top Bottom