headlight comparo

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 10, 2007
Threads
60
Messages
814
Location
Phoenix, Arizona
I know this has been done before, but it's always nice to see lots of different pics so one can narrow down the differences in the lights, than in the actual time of day, environment, etc.

1st pic - hir on the left, standard on the right

2nd pic - hir on the right, hid on the left

3rd pic - all 3 lights, from left to right, hid, hir, standard.

Pics aren't that great. But there was pretty noticeable difference between standard and HIR. There was a really big difference between the HIR and HID.

My buddy Carlos with a '95 fzj80 bought a pilot hid kit(4300k) after not being real satisfied with the HIR's. My rig that has the HIR and standard is a '94.

Standard bulb price. Around 16$ @ NAPA for both
HIR bulb price, 58$ shipped for both
HID, same pilot kit on ebay is 109$ shipped for everything needed.
hir.and.standard.webp
hid.and.hir.webp
all.3.webp
 
No, neither have the slee light harness.
 
Notice with the HID's the change in focus of the main beam and the additional light scatter outside of the focused beam the leads to a poor lighting pattern and excessive glare for other drivers. Ih8 people retrofitting HID bulbs in housings not designed for them.
 
Keep in mind the rig with the hid's is a few feet ahead of the other rig. The light pattern is actually very good when driving and lights up the road very well. I do agree with excessive light but it doesnt take anything from the light pattern. When you are sitting up higher than most vehicles you are going to blind them regardless in most cases. Just my thoughts
 
Dude, you'd get pulled over so fast in NJ with that HID kit its scary. Avoid.
 
Keep in mind the rig with the hid's is a few feet ahead of the other rig. The light pattern is actually very good when driving and lights up the road very well. I do agree with excessive light but it doesnt take anything from the light pattern. When you are sitting up higher than most vehicles you are going to blind them regardless in most cases. Just my thoughts

That means the beam is even worse that it first appears. Properly adjusted with the proper bulbs, your headlights should not blind others, especially oncoming cars. The HID bulbs you show have a lot of light scatter outside the now poor beam pattern, leading to a lot of glare for other drivers.
 
Creeper, my buddy in Beaverton has them for $120 a pop. If interested let me know and we can meet up:)
 
Notice with the HID's the change in focus of the main beam and the additional light scatter outside of the focused beam the leads to a poor lighting pattern and excessive glare for other drivers. Ih8 people retrofitting HID bulbs in housings not designed for them.

x2
one of these days they're gonna get a hood full of my ass bumper:mad:
 
I get brighted with my HIRs. If I put HIDs in the housings, what's the difference?

:meh:
 
I get brighted with my HIRs. If I put HIDs in the housings, what's the difference?

:meh:

An HID has a different focal point and length which leads to light scatter. The HIRs have the same focal point and length as the stock bulbs. If you are getting flashed, you need to adjust your lights.
 
try driving on the big island, everybody just drives around with they're brights on all the time, they don't even have a clue about flashing brights or just dont give an F, and now they're all starting to convert to HIDs... Big island its like living in a third world country except you can spend American money:hillbilly:
 
An HID has a different focal point and length which leads to light scatter. The HIRs have the same focal point and length as the stock bulbs. If you are getting flashed, you need to adjust your lights.

They're pointed more down than usual because of my truck's stinkbug.

I've never seen an HID conversion kit for 9005/9006. I might have to give it a try. :flipoff2:
 
Last edited:
They're pointed more down than usual because of my truck's stinkbug.

I've never seen an HID conversion kit for 9005/9006. I might have to give it a try. :flipoff2:

They are out there. Just type in piece of crap, illegal 9006 HID kit in ebay and you will get about 50 or so of the kits.

Just because you lifted the truck and it stinkbugs, doesn't mean the lights are not misajusted. The only way to know is to set up a grid and properly adjust them. You may only have one that is aimed high. Proper adjustment makes a huge different is how well you can see. Here is a link on how to properly do it:

Daniel Stern Lighting Consultancy and Supply
 
They are out there. Just type in piece of crap, illegal 9006 HID kit in ebay and you will get about 50 or so of the kits.

Just because you lifted the truck and it stinkbugs, doesn't mean the lights are not misajusted. The only way to know is to set up a grid and properly adjust them. You may only have one that is aimed high. Proper adjustment makes a huge different is how well you can see. Here is a link on how to properly do it:

Daniel Stern Lighting Consultancy and Supply

2X. In those photos, if those are low beams, then the truck on the right's lights are clearly misaligned. The DS (left) beam should be slightly lower than the right if I recall right.

Personally, I -like- having the other driver -not- be blinded by my lights. Having too bright of low beams &/or misaligned endangers others (blinding them) AND endangers you as not being able to see will sometimes cause them to swerve.

Putting random HID kits into low beams without adjusting the beam pattern or angle is childish. Its like walking up to a random stranger on the street and sticking your thumbs in his/her eyes.
 
Grench, where have you read that the drivers side headlight is supposed to be aimed lower than the passenger side? Everywhere I'm looking says they are to be aimed level with each other.
 
Back
Top Bottom