Headgasket mechanic

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 13, 2010
Threads
54
Messages
1,351
Hey guys, need advice/recommendations on a mechanic to replace the HG on my 97 Landcruiser. It has about 230,000 miles on the original HG and don't think it has blown yet but figure it is better to plan/schedule a replacement than be forced into one when it goes.

This is my wife's daily driver (she stole it from me), so can't leave it at a shop for a long time. Any recommendations on mechanics in Ventura/Simi valley area? I would be willing to drive into LA as well if there is a reputable shop there. Does Robbie still do work on LC's. Would having him come out to work on it be a reasonable option?

Thanks.
 
Robbie is in CO and I have a feeling he's a little more anchored there now.

There is a guy in Simi but I don't think he's looking for projects like this. Could be wrong. But I'll ask.
 
Thanks Joey - other thought I had was to swap in a low mile engine that has had maintenance done - would that be more work (cost more in labor) than a HG?

Would a trip to Colorado be reasonable option - schedule a vacation, drive to colorado, rent a vehicle and explore/camp then pick up the LC when it is done? Just trying to come up with options that are out there to have a reputable mechanic do the repair. I suffer from the typical mud overkill disease :)
 
Thanks Joey - other thought I had was to swap in a low mile engine that has had maintenance done - would that be more work (cost more in labor) than a HG?

Would a trip to Colorado be reasonable option - schedule a vacation, drive to colorado, rent a vehicle and explore/camp then pick up the LC when it is done? Just trying to come up with options that are out there to have a reputable mechanic do the repair. I suffer from the typical mud overkill disease :)

A motor swap is a lot of work, more than a HG
 
Thanks Joey - other thought I had was to swap in a low mile engine that has had maintenance done - would that be more work (cost more in labor) than a HG?

Would a trip to Colorado be reasonable option - schedule a vacation, drive to colorado, rent a vehicle and explore/camp then pick up the LC when it is done? Just trying to come up with options that are out there to have a reputable mechanic do the repair. I suffer from the typical mud overkill disease :)

If you are willing to do that, give Robbie (POWDERPIG) a call. ;)
 
Not sure how willing I am to drive to Colorado, but if there aren't any great local options I could see making a trip out there being something I would consider.
 
Not sure how willing I am to drive to Colorado, but if there aren't any great local options I could see making a trip out there being something I would consider.
Book in advance. From I can tell Robbie is a busy fellow. With that said I would love to roadtrip to CO.
 
Not sure how willing I am to drive to Colorado, but if there aren't any great local options I could see making a trip out there being something I would consider.

Georg in Stockton
K&H in Canoga Park is ok
Enterprise Import Service (Jerry) is pretty good

None of this are shade tree mechanics nor shade tree prices.
 
Yeah, I would definitely book an appointment before a trip like that.

There is a guy in Simi but I don't think he's looking for projects like this. Could be wrong. But I'll ask.

I'll explore local options first I think since it makes more sense. If you don't mind checking with your local guy Joey an letting me know that would be great.
 
Georg in Stockton
K&H in Canoga Park is ok
Enterprise Import Service (Jerry) is pretty good

None of this are shade tree mechanics nor shade tree prices.


Thanks, who is George in Stockton? Which of the 3 would you trust with a job like this? I am willing to take it to a reputable mehcanic and pay a reputable mechanic price. Just not a fan of paying for work that is done poorly or using poorly made parts.
 
Ah..are you the George that Joey was referring to? :) Didn't make the connection. HG is still alright and engine has been doing well. I know it has 230,000 on it and is going to need work at some point so maybe would make sense to do it all at the same time.
 
Ah..are you the George that Joey was referring to? :) Didn't make the connection. HG is still alright and engine has been doing well. I know it has 230,000 on it and is going to need work at some point so maybe would make sense to do it all at the same time.
No, Georg (no E) is from Valley Hybrids. Very reputable. He is @orangefj45 here on mud. Stockton, CA.
 
Thanks for clarifying. It gets confusing with screen names and real names getting used interchangeably.
 
As Joey mentions, local to you is K&H Land Cruiser specialists in Chatsworth, or Jerry @ Enterprise Import Service, just down the street from K&H.

I believe K&H has gone through an ownership change, with some of the younger mechanics buying out Richard, but not sure. Have not been there in a couple years. Perhaps Armondo runs it now...

I've had work done by both, and generally take my wife's car (not a LC) to Jerry when I don't feel like spinning a wrench.

K & H Imports Auto Repair - Canoga Park - Canoga Park, CA

Enterprise Import Service - Canoga Park - Canoga Park, CA
 
@cahill I drove mine to Colorado to have Robbie do it and that experience was great. Drove out, he took me to the airport and I flew home, then flew back a month later. In retrospect it was fun. I camped out in both directions and made a real trip out of it. Still good after 4 years. Like you, I just did it as scheduled maintenance.

Georg in Stockton is good people, and will do an excellent job of your head gasket. He's always busy so call ahead.

If your motor is good, I see no problems having the HG replaced even at 230K. Have the head redone at the same time and drive on.

Unfortunately, no matter who does it, there is no quick way to get this job done right. If down time is a big issue, you may be stuck driving it until it goes bad-and it may never go bad.
 
I wouldn't do a head gasket on a truck with 230K miles. It is bound to have more issues than that. Put a can of Bars leak head gasket sealer in it and run it until it drops or rebuilt the whole engine.

Couldn't agree more. Big fan of the Bar's ;)
 
As Joey mentions, local to you is K&H Land Cruiser specialists in Chatsworth, or Jerry @ Enterprise Import Service, just down the street from K&H.

I believe K&H has gone through an ownership change, with some of the younger mechanics buying out Richard, but not sure. Have not been there in a couple years. Perhaps Armondo runs it now...

I've had work done by both, and generally take my wife's car (not a LC) to Jerry when I don't feel like spinning a wrench.

K & H Imports Auto Repair - Canoga Park - Canoga Park, CA

Enterprise Import Service - Canoga Park - Canoga Park, CA

Alf!!! Where have you been? Did you get an 80 finally?
 
Back
Top Bottom