Okay guys, looking for ideas on how you guys mounted your harnesses in your regular cab mini trucks. The reason for asking is that I cant run a harness bar through the cab like most people due to having to have the seats all the way back (I'm 6'4). So if anyone has any ideas, post them up!
Harnesses in a Mini
- Thread starter afarmer1062
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You can mount the bar very low and they make a strap to extend the mounting point for the belt.
Yes it is. Just make sure it is completely latched.
Ask me how I know.
Ask me how I know.
looks like Mark is either gasping in shock and aw, or causally snacking during all the turmoil
- Thread starter
- #6
Yeah I know harnesses are supposed to be mounted shoulder height. I thought about maybe welding a piece of flat stock across the back wall to mount them to. Not sure how well it would work though.
Mark is casually snacking while I was experiencing my virgin flop.
- Thread starter
- #8
Flopping on my side with 3 point isn't what I'm too worried about, being on my lid more so lol. Lap bet would probably save me, but can never be too safe.
Sure you can....
Good reference for belt mounting.
https://simpsonraceproducts.com/pdf/inst/Seat_Belt_Mounting.pdf
https://simpsonraceproducts.com/pdf/inst/Seat_Belt_Mounting.pdf
- Thread starter
- #13
I've decided to hold off on the harnesses for now. I've got a front end issue I need to deal with now, after wheeling yesterday.
Yea I have the 4 point harness in my 40, came with my old seats, but have never used the shoulder straps. Nice to know they are there if I think I need them, but have never got to that point. When the time comes I hope I don't figure out I need them a little too late.
They are so easy to put on, Mark, you can put them on mid roll .
Well, you don't really know how far off camber you can safely get without flopping till it flops...
In this pic I found out.
In this pic I found out.
Your flopover meterer is now calibrated.