Guess what broke?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 7, 2005
Threads
303
Messages
2,353
Location
South Jordan, UT
090428%20air%20hose.jpg



"Yeah, I should clean that air filter before I head down to Cruise Moab tomorrow."

I was VERY, VERY careful--but it was just apparently too old and dried out. Barely put any force on it at all. You don't know how dried out and hard that tube is until you hold a brand new one. Guess that's what happens after 16 years.

In other news, I apparently have coolant leaking from somewhere. Not enough to leave a puddle on my floor, but enough to find coolant on the steering arm and DS lower shock mount. Ideas?

Going to Moab tomorrow night.
 
Hang in there. These things tend to come in waves somehow - Murphy's Law. The way I look at it - what alternative drive you can get with $2000 a year.
 
Oh, I'm not really complaining.
It's just the coincidence of spending a bunch of money on fun extravagant things like gears and tires and spending a bunch of money fixing things like A/C compressors all about the same time.
 
In other news, I apparently have coolant leaking from somewhere. Not enough to leave a puddle on my floor, but enough to find coolant on the steering arm and DS lower shock mount. Ideas?

Going to Moab tomorrow night.

Coolant leaks on the left side of the motor would originate from the PHH, the throttle body bypass hoses, the upper radiator hose, upper neck or tank bypass hose.
 
I just had the same exact expierence with my intake. I also am looking at an a/c compressor in the very near future. So I can honestly say "I feel your pain"
 
I know.
No time to wait for parts from Cruiser Dan on this one.

Me to last week, but mine was only $11 total. Dan was great confirming part numbers etc. A true friend, gentleman, professional and hell of a sharp Landcruiser dude!

Dan chimed in on the cost of your part before I could. I WAS going to say YIKES :eek: that's not a Cdan price. Outside a short notice fix or emergency, Dan will ALWAYS get my business.
 
Man did you ever get banged hard.
:eek::lol::lol:

Me to last week, but mine was only $11 total. Dan was great confirming part numbers etc. A true friend, gentleman, professional and hell of a sharp Landcruiser dude!

$11?:confused: That is a little too cheap unless some of this business was involved:
Did you get a kiss or a reach-around?
:flipoff2: IIRC I bought one from Dan for about $70-ish.

Cdan always gets my buisiness too. He is very helpful and is a walking parts database. Luckily the :princess:hasn't find very many of my invoices from Am. Toyota;) especially the $800-3400 ones:eek:

Coolant leaks on the left side of the motor would originate from the PHH, the throttle body bypass hoses, the upper radiator hose, upper neck or tank bypass hose.

How about the drain plug on the block? I have a small leak from taking the plug out repetedly for cooling flushes. It's torqued to spec, but I need to put some teflon tape on it this summer when I install my block heater for the upcoming nasty cold Ohio winter:o.
 
Sorry for the confusion - lock washers and c-clips for the front end not the intake! Could only get a 10% AAA discount from the local dealer...and MSRP was probably over what Dan always quotes MSRP from Yota to begin with! Memory was about $80ish for the intake a year or so ago.
 
I just got a new one from Dan last week-(Thanks Dan!) Mine broke last year, and my repair held up very well. Glue it back together with rubber cement. Let it dry. Put rubber sealant in the groove. Cut little rectangles of sheet metal (approx. 3/8" x 1") and bend them into channel shapes to lock the corrogations together. I made about 10 of various sizes, and used the best 4. Then wrap with strechy rubber electrical splicing tape to hold the locks down. Then a couple of wraps of regular electrical tape, and a large hose clamp over all of this mess. This should get you by till your new one comes in.
About a month ago, I was having an idle problem. I ordered vc gasket, spark plug seals, TB gasket, and new intake hose from Dan, but meanwhile fixed the idle problem by cleaning the idle air valve seat.
It ran even smoother after cleaning the TB and replacing the hose, but I dont think I had any leaks around my hose repair.
Drew
 
all of our 80's are about the same age so things like this is a common occurrence. I replaced both intake air tubes in both 80s in a span of two months.

If you have a high mileage 80, say over 150k and the tube is rock hard, it's time to replace it as a PM. Paying the Mud price at your convenience vs forced to purchase it at list price is more preferable IMHO.
 
Back
Top Bottom