GT Covers install question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 21, 2006
Threads
10
Messages
65
I ordered a couple weeks ago the Endura seat covers for my 95. They arrived and worked on installing them last night. I got the driver's side on fairly easily, but the passenger side is another story. There just doesn't appear to be much room underneath to pass the straps through and adjust. Do most people take the seat out to make it easier? Are there just the four bolts and maybe a plug for the power?
 
Sorry I don't have a solution for you. Although taking the seats out should be straight forward if it comes down to it.

When you finish the install, could you please post some pictures , I've been wanting to see the fit on these, have only been able to see pictures of the leather covers. And if you do the rear seats please include those pics as well.

Thanks a bunch

Ross
 
The best thing you can do is to undo the four bolts per seat and simply tilt them backward, no need to remove them out of the vehicle as they're really heavy! By doing this, you can do a good job of routing the straps under the seats and finding decent anchor points..

The fit and finish on these products is excellent. I have bought three sets from them over the years and their customer service is commendable when I found a defect with one set.
HTH.
 
Thanks, I kind of figured I could do a better job with the seats unbolted. I guess I'll give them another try tomorrow. Also, right now I'm just doing front seats due to cost. But they do appear to be good quality.

The best thing you can do is to undo the four bolts per seat and simply tilt them backward, no need to remove them out of the vehicle as they're really heavy! By doing this, you can do a good job of routing the straps under the seats and finding decent anchor points..

The fit and finish on these products is excellent. I have bought three sets from them over the years and their customer service is commendable when I found a defect with one set.
HTH.
 
pics of the fronts greatly appreciated

Ross
 
After initially trying to install the seat covers without removing the seats, I decided to go ahead and remove the four bolts on each seat and lean them back to be able to attach the bottom seat appropriately. I couldnt figure out a way to attach the passenger seat without leaning it back to get to the underside. I am pleased with the fit and color. They are hot, especially here in Florida, but I don't know that they are much hotter than my old dryed and cracked leather. Here is a pic, the driver side didn't turn out because of the sun.

ry%3D400
 
fit looks pretty good I might have to have a closer look at these, thanks
 
Back
Top Bottom