Barging in here to introduce myself and lead off with a few question-y thoughts.
I'm John....and I am soon to be a newly minted Land Cruiser addict.
Having been a 4x4 geek for some time now, domestic iron mostly, I find myself having the itch to buy an LC. Costs being what they are, I have put it off for as long as I can, and plan to finance one though my credit union on a signature loan or used car loan depending on rates.
Local to me is a 95 '80", locked, and has some smart overland goodies. 260,000 on the clock, and looks to have been driven by an adult as a DD + overland treks. It is pretty much a quintessential LC. Pretty enough not to be embarassed, but has "patina" enough so as not to be worried about getting finger prints or smudges on it. NOT a garage queen. It has been driven, though does not look to have been beaten up in any way. Previous owner, through emails, seems to be my kind of guy in that, he comes across as a world class anal retent. I have to confess I am getting a good feeling in my gut about this machine so far. I will know more once I get to fondle and crawl around on it.
I am going to go look her over tonight armed with a printout of various guides found here for initial inspection.
I have indeed done my due diligence here. I have read/am reading most everything I can to get a feel for the types of things that could be considered points of failure, common to this vintage machine.
Since a lot of the posts I have been finding here date back a ways, I wonder if there are any folks here who might be willing to pass on some wisdom regarding how they like to base line and dial in a "new" purchase of an 80 with this kind of mileage?
With 260=K on the thing, I have to confess to being a little bit tense about spending this kind of money. (north of $5500) Add to that the fact that while its not like its a mortgage, I will be borrowing the buy in capitol so the fear level is plenty high.
I am handy with wrenching on all BUT operations that require opening the motor, dropping the transmission, dealing with wiring diagrams.
PM, and normal wear type repairs are all in my wheel house and will be done by me. (side note, could someone either tell me, or point me to a list of "at home" tool kit inventories and "field" tool kit inventories? The later model Yotas are all metric, correct?)
Any how, if all goes well, and I can actually cajole LOML to share the excitement, I will be looking to bring this machine home in the next week or so. Fingers crossed.
OK, so
I'm John....and I am soon to be a newly minted Land Cruiser addict.
Having been a 4x4 geek for some time now, domestic iron mostly, I find myself having the itch to buy an LC. Costs being what they are, I have put it off for as long as I can, and plan to finance one though my credit union on a signature loan or used car loan depending on rates.
Local to me is a 95 '80", locked, and has some smart overland goodies. 260,000 on the clock, and looks to have been driven by an adult as a DD + overland treks. It is pretty much a quintessential LC. Pretty enough not to be embarassed, but has "patina" enough so as not to be worried about getting finger prints or smudges on it. NOT a garage queen. It has been driven, though does not look to have been beaten up in any way. Previous owner, through emails, seems to be my kind of guy in that, he comes across as a world class anal retent. I have to confess I am getting a good feeling in my gut about this machine so far. I will know more once I get to fondle and crawl around on it.
I am going to go look her over tonight armed with a printout of various guides found here for initial inspection.
I have indeed done my due diligence here. I have read/am reading most everything I can to get a feel for the types of things that could be considered points of failure, common to this vintage machine.
Since a lot of the posts I have been finding here date back a ways, I wonder if there are any folks here who might be willing to pass on some wisdom regarding how they like to base line and dial in a "new" purchase of an 80 with this kind of mileage?
With 260=K on the thing, I have to confess to being a little bit tense about spending this kind of money. (north of $5500) Add to that the fact that while its not like its a mortgage, I will be borrowing the buy in capitol so the fear level is plenty high.
I am handy with wrenching on all BUT operations that require opening the motor, dropping the transmission, dealing with wiring diagrams.
PM, and normal wear type repairs are all in my wheel house and will be done by me. (side note, could someone either tell me, or point me to a list of "at home" tool kit inventories and "field" tool kit inventories? The later model Yotas are all metric, correct?)
Any how, if all goes well, and I can actually cajole LOML to share the excitement, I will be looking to bring this machine home in the next week or so. Fingers crossed.
OK, so
