Going to Australia taking orders

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

azTony.. You are right I can not bring all these items back and of course what comes back is not free in some situations if may be cheaper people to ship in another manner.

Although if anyone does not have the resources to get something state side and I can help out. I will do what I can.

Scott
 
To everyone interested in H55's I hear ya... I do not have any on the ground over there now. I can however pick you one up while over there with money up front. I can not tie up my resources on item like that right now.

If you are serious about H55 let me know by email what exactly your are looking for.. ie used, recon, new? or even rebuild kits. Keep in mind our dollar is weak to the Australian dollar right now and things are what they are.

My email address is in my profile

Scott
 
68volfan said:
To all Mudders I have received a lot of interest for items in Australia. currently the trip has been delayed due to logistics. It also seems that this shipment is full. After I finalize things I will repost with updates on space and trip dates.

Scott
Click to expand...

So, how do we know if our orders will be included in the container? I sent you an inquiry/request on Feb 10th and never heard back from you.
 
Oyajijon I searched my emails and post linked to this trip and could not find anything from you, it is possible that your request went to spam and was deleted. I may have been slow to respond to the emails and post by I tried to answer each one.

I hope you find what you are looking for.

Have a great day

Scott
 
Last edited:
Hello guys

Things have gotten to the point where I am not able to pin point a date on the trip.. This is due to a few reasons. The main one being that our dollar is so weak against the Australian Dollar that it is not feasible
at this time. I do apologize for getting your hopes up.. I still have everyones info that emailed me and of course links to this tread. Once the trip is rescheduled I will contact all that has contacted me.

Cheers
Scott
 
Hello Guys

The trip is on agian I will be leaving July 12th.. I have taken note of the items of interest.

H55f for 40 series
80 series extended range tanks and fillers.
60 series sliding windows

I also had a few wanting diesel set-ups I am not sure I can source those out on this trip although I am going to give it a look between now and then an of course while there..

Again I would like to apologize for pushing the orginal tread out there before things were certain but that is how things go sometimes.

If I have not touched base with you again please fill free to contact me if still interested.

Cheers
Scott
 
Hey Scott, Any chance you could find bumper ends for that TJM T-15 bumper you sold me for my 100? I also need the turn signals/parking lights since the ones I sourced are for a different model and are too short. The T-15 model I have has the "T" recovery points cut out. Thanks!

How much would a new TJM T-15 be for a 100? I might just get a new one...
 
Hi Guys i just picked up on the thread and i recon you guys would love my Lab well i call it the lab its one of Australias largest 4x4 wrecking yards (one of).
I am very fortunate to have worked a deal in which every new product i make, i give one to them for free so they allow me to wonder through the yard for as long as i like anytime i like (within reason of course).
They have rows of 40s, rows of 60s, rows of 80s, you get the picture its quite staggering how large it actually is.
Not sure how it would work but im more than happy to talk to the yard and also because some yards just say no because its to hard i can have a peak around and confirm.
Just sayin not selling maybe good for the smaller harder stuff to get.
maybe a list of common items that the american market require obviously all ours are RHD but they are everywhere.
 
RHD 80series steering arms! the bottom side of the left knuckle!
If I were you, I'd buy as many as possible because people wanting hi-steer with an 80 axle need these. I want one of them!
 
68volfan said:
Hello Guys

The trip is on agian I will be leaving July 12th.. I have taken note of the items of interest.

H55f for 40 series
80 series extended range tanks and fillers.
60 series sliding windows

I also had a few wanting diesel set-ups I am not sure I can source those out on this trip although I am going to give it a look between now and then an of course while there..

Again I would like to apologize for pushing the orginal tread out there before things were certain but that is how things go sometimes.

If I have not touched base with you again please fill free to contact me if still interested.

Cheers
Scott
Click to expand...


I'm still interested in a set of cable lockers with thirds only

thanks
 
67azcruizer

I have been on the look out for the lockers since you first posted. My mate over there say they are very rare and if I did run across one they would be expensive. Although if I do find any I will surely let you make that call.

Scott
 
68volfan said:
67azcruizer

I have been on the look out for the lockers since you first posted. My mate over there say they are very rare and if I did run across one they would be expensive. Although if I do find any I will surely let you make that call.

Scott
Click to expand...
Gday scott.
Lockers i assume airlockers if thats the case they are not to expensive "well sorta" i had them fitted to my 100 series 3k fitted front and rear.
Im not sure if thats exspensive but ARB have tested in Ausssie style in a controlled environment and they are as tough as they come, they did some fairly good comparisons in 4wd Action they tested all lockers to destruction with some interesting results but ARB came out on top.
Adrian
 
Mudplugger, how common are the FJ/FZJ80 overhead Subtank/Altimeter Gauges? I have the grey-colored overhead console surround, subtank and all the other bits installed and working, just looking for the actual Sub/Alti gauge assembly. Perhaps there is one waiting out in your "Lab".

Part Number is 83290-60090 or 83290-60010 (older version).

:cheers: and thanks for looking.

Steve
 
You must log in or register to reply here.

Share this page

Back
Top Bottom