Going British?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Over here it was cheaper to buy an 80 series that have lockers fitted to my old Landrover 110.

Here too.

An 80 series (with 35" and a 4" lift) is smaller smaller than a 110.

Smaller in length perhaps but I find it difficult to believe such an 80 would be narrower than a 110. In addition, the 110 would have a far lower center of gravity. However, I've never seen a 110 anywhere in the wild (outside of the National Geographic Channel) so I can't say how they'd do off road. Certainly an expedition vehicle and not a rock crawler.

Discovery series 2 and 3 are bigger and wider than an 80 series.

Disco II
Length: 185.2 in. Width: 74.4 in.
Height: 76.4 in. Wheel Base: 100 in.
Ground Clearance: 8.2 in. Curb Weight: 4576 lbs.
Gross Weight: 6064 lbs.

80 Series Land Cruiser
Length: 189.8 in. Width: 76 in.
Height: 73.6 in. Wheel Base: 112.2 in.
Ground Clearance: 10.8 in. Curb Weight: 4834 lbs.
Gross Weight: 6470 lbs.

The Series I Disco was smaller than the Series II as is the Range Rover Classic.
 
Absolutely. Go onto LR sites and you'll find videos of LRs making it and Toyotas failing. On Jeep sites, it's the same. In most cases, the driver makes the biggest difference.

All makes have their good & bad points: evaluate, test-drive if you can and buy whatever you like.

Sometimes discussing different makes is worse than talking politics or religion lol! We all need to stick together against the tree huggers, wherever we are in the world.

Let us be united!! AMEN!
 
Absolutely. Go onto LR sites and you'll find videos of LRs making it and Toyotas failing. On Jeep sites, it's the same. In most cases, the driver makes the biggest difference.

All makes have their good & bad points: evaluate, test-drive if you can and buy whatever you like.

Sometimes discussing different makes is worse than talking politics or religion lol! We all need to stick together against the tree huggers, wherever we are in the world.

Yep. It's not like anyone on this forum is trying to talk people out of their 80's and into a Land Rover. Personally, I'm just pointing out that Rovers, or other 4x4 makes aren't the Devil incarnate. They have some good points.
 
Smaller in length perhaps but I find it difficult to believe such an 80 would be narrower than a 110. In addition, the 110 would have a far lower center of gravity. However, I've never seen a 110 anywhere in the wild (outside of the National Geographic Channel) so I can't say how they'd do off road. Certainly an expedition vehicle and not a rock crawler.

Yes the 110 is not as wide as an 80, but my 80 is shorter than my mates 110 overall, we have had the tape out.

Disco II
Length: 185.2 in. Width: 74.4 in.
Height: 76.4 in. Wheel Base: 100 in.
Ground Clearance: 8.2 in. Curb Weight: 4576 lbs.
Gross Weight: 6064 lbs.

80 Series Land Cruiser
Length: 189.8 in. Width: 76 in.
Height: 73.6 in. Wheel Base: 112.2 in.
Ground Clearance: 10.8 in. Curb Weight: 4834 lbs.
Gross Weight: 6470 lbs.

The Series I Disco was smaller than the Series II as is the Range Rover Classic.

The series 1 disco and RRc are smaller all around than an 80 series. As for the size on paper, the disco's are a lot taller therefore when on a side slope lean over a lot more. Also if you remove the wheel arches from an 80 it is smaller than a S2 disco. I have put my 80 in a lot more places that the D2s will go. You will be surprised how far it is from the rear axle to the rear end on a D2, its a lot more, that is why theres not a lot more in the overall length.

But in the real world the 80 is better:D.

Paul
 
In addition, the 110 would have a far lower center of gravity.

Disco II
Length: 185.2 in. Width: 74.4 in.
Height: 76.4 in. Wheel Base: 100 in.
Ground Clearance: 8.2 in. Curb Weight: 4576 lbs.
Gross Weight: 6064 lbs.

80 Series Land Cruiser
Length: 189.8 in. Width: 76 in.
Height: 73.6 in. Wheel Base: 112.2 in.
Ground Clearance: 10.8 in. Curb Weight: 4834 lbs.
Gross Weight: 6470 lbs.

The Series I Disco was smaller than the Series II as is the Range Rover Classic.


I find it hard to believe that the COG of a 110 is lower than a 80 :hhmm: The 110 is much taller than the 80 and then people put all sorts of stuff on the cool roof racks!
 
Everytime someone pops up this kind of question about LR, I bet we'll hear horrible stories Rover and Rover again. ;)

Yeah, the horrors about our window regulators and fake wood trim

Sorry, couldn't help myself :D
 
so, was this a truck problem, or a driver problem...:popcorn:

YouTube - How NOT to 4x4


Saw that on some lame 'real video' show where they show a video and have a bunch of washed-up stars like Leif Garret,Todd Bridges and Gary Busy comment on it. As if their opinions matter.

One comment was "White people with too much time on their hands."

Ooooookay....

:confused:
 
Saw that on some lame 'real video' show where they show a video and have a bunch of washed-up stars like Leif Garret,Todd Bridges and Gary Busy comment on it. As if their opinions matter.

OK, I know this is off topic, but Todd Bridges was / is Greatness Incarnate. He was entirely upstaged at every attempt by Gary Coleman. Show some respect.

Just kidding.:flipoff2:
 
my father owns a landrover repair shop. business is real good... I've owned several disco II's. IMO they're great off road, look cool lifted and the driving position is the best. put 3k aside for random horrible unexpected trouble. after you burn through that, set aside another 3k :bang:
 
I find it hard to believe that the COG of a 110 is lower than a 80 :hhmm: The 110 is much taller than the 80 and then people put all sorts of stuff on the cool roof racks!

The 110, 90, Rangie classics, D1's and D2's were engineered with aluminum bodies and all the weight sits down near the vehicle frame and engine. You can FEEL the difference when you drive one of these rigs. Rovers excel at off camber driving especially in their stock form. Again, all of this was designed into the vehicle and is easy to test. Simply drive one. Take is along their test bed and see how many degree's it takes to get that uneasy feeling in your shorts. Then take it a little farther because your rover isn't finished yet.
 
my father owns a landrover repair shop. business is real good... I've owned several disco II's. IMO they're great off road, look cool lifted and the driving position is the best. put 3k aside for random horrible unexpected trouble. after you burn through that, set aside another 3k :bang:

That is what I really miss about my Range Rover Classic. I could see all four corners of that truck and knew exactly what my wheels were doing. I was very in gauged with the driving process. The vehicle feels like its part of the road.

I never had one of those big repairs but I did have to throw a couple hundred here and there for repairs but nothing catastrophic. Just good preventative maintenance.
 
My favorites include the D110 sold here in the States, the D130's and the Series III 109 wagons.

Now around 2002 I was in the process of buying and shipping over an 1975 SIII 109 Safariwagon with a diesel engine and was used by the forestry service in the UK. Had factory full roof and hood racks. Pretty much loaded, and had half doors. 3.5K USD shipped to Seattle, WA... but my soon to be exwife at the time threw a phawking fit. I could have flipped it for three times what I paided for it. And I had an OEM LHD firewall out of Texas I was going to buy for 600 bucks shipped. My intentions were to take out the entire drive train and rpelace it with Toyota. Oh well.... my fault for marrying a stupid C**NT!
 
Last edited:
The 110, 90, Rangie classics, D1's and D2's were engineered with aluminum bodies and all the weight sits down near the vehicle frame and engine. You can FEEL the difference when you drive one of these rigs. Rovers excel at off camber driving especially in their stock form. Again, all of this was designed into the vehicle and is easy to test. Simply drive one. Take is along their test bed and see how many degree's it takes to get that uneasy feeling in your shorts. Then take it a little farther because your rover isn't finished yet.

Not quite right.

Disco were steel chassis, bulk head, floor pannels and boot floor. Outer pannels were Ali.

Defenders/110/90s were Ali pannels and steel chassis and bulk head.

My old RR.
PIC000001-1.jpg


My old 110
DSCF0781.jpg

Paul
 
Back
Top Bottom