getting it back on the road

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 13, 2012
Threads
69
Messages
553
Location
fort smith, arkansas
id like to start off by thanking everyone that has answered the plethora of questions ive been throwing on here over the past several weeks. I bought this 67/40 and immediately jumped back on mud after roughly 10 year hiatus. this is my first 40 series, and this is my build up.

my intention here is not a showroom build or a parade truck. it is a functional, well running, quality 40, that will probably catch the eye of Toyota enthusiasts more than the normal person. that being said, I can be a stickler for oem parts and I generally stay away from after market if possible.

this was it the day I bought it. I knew it had issues, but nothing jumped out at me as extreme problems. I drove it down the road and back, all gears. engaged the 4wd, and did a thorough inspection. I decided to bring it home, the seller even threw it on a trailer and delivered it for me. nice guy.
IMG_3767.webp


next I started on a tune up. I did plugs, wires, dizzy cap, and rotor button all from the Toyota, along with a dip stick because the old one wasn't oem. halfway through the tune-up my fuel pump went out, and that's when some of you saw my fuel pump debacle. I had to use half parts from my original and the internals/upper half from my new one.
IMG_4009.webp

IMG_3961.webp

with the new parts, new problems popped up. im having fuel leaks and carb idling issues I am currently working through. I did however get all my parts in to fix my electrical issues, my lamps were sporadic at best.
 
I swapped out the electrical junction boards and cleaned my ground and replaced the lamps with new oem ones. everything works now, yay. I still am waiting on my oem rear tail lamps to ocme in. I spent several hours removing not 1, but 2 sets of old trailer wiring harnesses.
CVEJ6545.webp
IMG_3894.webp
IMG_3965.webp
JLOY8829.webp

JOAC6817.webp
 
I removed the top and doors with the help of a cousin and started my patina clean up, and threw on a bikini top until I can rebuild my hard top and doors. I also started replacing weather gaskets, I started with the kick vents because there weren't any there at all..
FXKJ5343.webp
IMG_3918.webp
IMG_4005.webp
JWNO1878.webp
YAOL1278.webp
 
ive placed an order with a mud member for an oem remote oil filter kit, and I have ordered several engine gaskets. ill be trying to take care of a few leaks. after that id like to attack the suspension, and replace bushings and steering components.
 
Back
Top Bottom