gear oil question?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Well, got my email reply from Lucas Oil regarding Bob's the Oil Guy. Apparently, Bob works for a competing lubricant company. Would explain a little about the motivation for his test. :)

Bob's the oil guy works for Schaeffer Lubricants. We have tried the exact
same tests in our labs and could not come up with the same result.

Lucas Heavy Duty Oil Stabilizer is a 100% petroleum additive with
anti-foaming additives. It has helped extend the life, lower maintenance
costs and improve performance of millions of cars, trucks and Heavy Duty
Vehicles as well and countless high performance racers since 1985.

Feel free to call me anytime.

Dale Wilcox
Lucas Oil Products, Inc
(800) 342-2512 Ext 115

Take it for what it's worth, I guess. :beer:
 
lmao lucas own kits at your local parts stores are setup and done by lucas, does the same damn thing. Turns milky and you can see air trapped in the oil.


Again, manufactures have developed automotive lube with anti foaming for a REASON.
 
I have seen the kits that you mention and yes there are little bubbles in the oil, BUT ! bubbles or not, there is still substantially more oil getting to the top than the sample without the additive, and due to the viscosity it is far more likely to stay there.
 
lol, each bubble is lack of lube = metal to metal contact. Now you only can spin it so fast, now think real world where it mixes much more and for longer intervals. SO much so it can foam out the breathers. Add little heat from all the spining now you have a thin milk mess running all over.

Want viscosity pick a heavier LUBE, this is why they make them, grade them, and divide them up.

In all the yrs companies spent testing and making all these lubes, one additive will make everyone of the them work or act better. Come on, someone cut the wool over your eyes.


low engine pressure, run heavier weight, gears making some noise from normal wear, run heavier weight.
 
Then how come it makes things quieter ? If it caused metal to metal contact that would make things louder. It would be doing the exact opposite of what Lucas say it does, more noise, shorter engine life, harder starting etc etc. If this really is the case how is it they are still in buisiness ? Where are the independent tests that show they are con men ?
 
Back
Top Bottom