Fuel shut off module help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 3, 2014
Threads
8
Messages
30
Fixing up a 1984 hj47 with a 2h out of AUS. The guy I got it from had rigged a rope through the fire wall to a pulley to pull the fuel shutoff. Got the engine rebuilt and back in and the rope broke. While I will miss the wood toggle kill rope time to fix it. Having trouble finding parts and outside of a few pics not sure where things go have nothing to take off and replace. Looking for help and parts.
 
No edic and no connector rod was wanting to fix it properly. See about where the module goes don't see how it is mounted
 
Lots of great EDIC info in this thread:


though not so many great photos for what you're after.

The second photo in this thread gives a decent idea of mounting because the 2H is out of the truck. Follow the connecting rod from the rear of the injection pump and you'll see the EDIC:

01-jpg.330632


Tojo4wd in Aus has them, although they want a core (I've done business with them from the US and been very pleased):

 
Lots of great EDIC info in this thread:


though not so many great photos for what you're after.

The second photo in this thread gives a decent idea of mounting because the 2H is out of the truck. Follow the connecting rod from the rear of the injection pump and you'll see the EDIC:

01-jpg.330632


Tojo4wd in Aus has them, although they want a core (I've done business with them from the US and been very pleased):

Thanks. That's way more info than I had yesterday
 
You could go to a tractor/construction supply shop and find a manual fuel shutoff. These will be a hardened, sheathed wire. John Deere!
1580474062737.webp
 
  • Like
Reactions: J2P
Back
Top Bottom