Front end clunk

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 1, 2014
Threads
20
Messages
93
Location
Wherever the money is!
hey everyone. I was doing some mild trail riding this weekend and ran into another group that asked me to tag along, we were on a pretty mellow trail but I was doing about 10-15mph to keep up with them. By the time we got to the next trail I heard a clunking noise from the front end. It sounds almost like the axle shafts are sliding side to side but I'm not really sure. All nuts/bolts are tight, no play in the wheels, pulled front shaft and noise is still there. It also still drives totally normal down the highway. I'm a bit stumped as what I should look at next. Any info would be much appreciated
 
Sounds like a loose control arm bolt at the frame mount or a loose bolt at one or both ends of the track bar (panhard).
 
Last edited:
Sorry I should've added more info. Sway bar bushings and links are a few weeks old and everything is tight. Trail gear steering kit is a few months old but again everything is tight, also have newer shocks and those look good as well.
The noise mostly sounds side to side but sometimes it also sounds rotational if that makes any sense.
I have new track bar bushings but haven't had a chance to install yet
 
I 2nd on sway bar hardware. Expecially the end end that attaches to frame. One with Allen key.
 
Tools it's right I had some sound in mine after a trip and front sway bar bushes where it attached to frame were gone it sounds like axle sliding in and out. It's hard to see where it attached to axle but bet ya that's it
 
Back
Top Bottom