Front Drive Alignment and Turned Axle

[SouthMS40]

I took the time to disassemble the front end and have determined my best bet is to undo the shackle reversal. I'm planning to buy some new forward mounts from RoughStuff and possibly fab up a new rear mount, that's still TBD.

 

[White Stripe]

I would install some shims and see if your steering really will hit. Plenty of shackle reversal soa axle 40s are out their without a issue. If the tie rod hits the springs take a torch, heat up the arms and bend them upward a few degrees or get different arms.