front axle NOISE

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 28, 2004
Threads
157
Messages
2,023
Location
Norwich, VT
test drove a '97 for some friends that have become interested in bying an 80 series.....Jump in start it up drive about 40 feet drive off my driveway turn sharp and knock nock knock knock etc....happens on both sides low range and high range....I was like :eek: My '94 with more miles is silent in this regard (maybe 'cause I grease the knuckles on occaision throught he filler plugs AND have done a full front axle service....) My question is....if a full service was done on the '97 would the noise dissappear, or has the damage been done? One of the knuckle exterior was rusty/dry (not neccesarily pitted yet) as well....I told my friends to pass but was wondering about clacking birfs and recovery potential....
 
Hard to tell with looking but I would assume the noise equals metal to metal contact which in turn equals damage.
 
yeah, funny thing was I could totally picture the birf and visualize the parts clacking together - made me wince...
 
Not to hijack, but seems like a good time to ask the question:
What is acceptable wear for a birf to be resused? ie: any photos of a good birf versus a slightly worn versus very worn versus extremely worn ???

I don't mean obviously broken or cracked, just worn; at what point does it become not reusable?? Any method to measure the wear, or is it just an eyeball test?

g
 
test drove a '97 for some friends that have become interested in bying an 80 series.....Jump in start it up drive about 40 feet drive off my driveway turn sharp and knock nock knock knock etc....happens on both sides low range and high range....I was like :eek: My '94 with more miles is silent in this regard (maybe 'cause I grease the knuckles on occaision throught he filler plugs AND have done a full front axle service....) My question is....if a full service was done on the '97 would the noise dissappear, or has the damage been done? One of the knuckle exterior was rusty/dry (not neccesarily pitted yet) as well....I told my friends to pass but was wondering about clacking birfs and recovery potential....

Actually, if that is the only thing wrong with it; maybe your friend could use that as a bargaining chip; ie: assume everything needs to be replace, birfs and axle shafts, (?even diff), and deduct those costs from the asking price; if once it is apart the parts are still good, he is ahead of the game. Heck, he could offer $3-4K less for the cost of a new axle rebuild with diff (dealer prices).

g
 
Actually, if that is the only thing wrong with it; maybe your friend could use that as a bargaining chip; ie: assume everything needs to be replace, birfs and axle shafts, (?even diff), and deduct those costs from the asking price; if once it is apart the parts are still good, he is ahead of the game. Heck, he could offer $3-4K less for the cost of a new axle rebuild with diff (dealer prices).

g


for sure, except other "interesting" features included lots of evidence of oil leakage (from pcv on valve cover and other places, a welded (to the exhaust down pipe) exhaust, no lockers, and a $10k asking price...My reccomednation was to pass.....

another interesting aspect was that the dealer hadn't prepped the vehciel yet (it has just come in on trade) and the dealer asked my friends fir a list of things that their "landcruiser friend" (me) found wrong with it.
 
Back
Top Bottom