FR & RR Diff carrier bearings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 20, 2004
Threads
126
Messages
2,989
Location
Reno, NV
I have searched and searched and I couldn't find what I was looking for.

So I turn to the 'sperts, does anyone have the part numbers for the Timken bearings for the front and rear factory locked differential carrier bearings. I have been able to find the rear Unlocked numbers, but not the Locked versions.

Second part, I will be re-gearing to 4.88's and the truck has 160k on it, ring&pinionbiz said the bearings would be fine with that mileage, but the more I thought about it, I the more I would rather replace since I am going to be in there anyway. Now if someone can convince me otherwise, then I won't worry about it.

Jack
 
The carrier bearings should be fine, the pinion bearings are where the most wear occurs.
 
I would still inspect all the parts that are being torn into, you can't assume they are in good shape...check....IMO
 
carrier bearings

There is no timken interchange for them. We stock the locker bearings in OEM Koyo for the front diff. The rear are the massive ones that as of right now are toyota OEM only. We are working on getting them at a somewhat reasonable price someday, but really the rear locker carrier bearings are huge and dont really fail.



I have searched and searched and I couldn't find what I was looking for.

So I turn to the 'sperts, does anyone have the part numbers for the Timken bearings for the front and rear factory locked differential carrier bearings. I have been able to find the rear Unlocked numbers, but not the Locked versions.

Second part, I will be re-gearing to 4.88's and the truck has 160k on it, ring&pinionbiz said the bearings would be fine with that mileage, but the more I thought about it, I the more I would rather replace since I am going to be in there anyway. Now if someone can convince me otherwise, then I won't worry about it.

Jack
 
Not to mention the insane shim unobtanium problem.

The shims are not directly related to the bearings as much as to the variances in the R&P itself.
 
Back
Top Bottom