Fox shox

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 12, 2007
Threads
69
Messages
329
Location
Tucson, AZ
I love these on my mountain bikes and wont run anything else. I would like to use them when I put the 80 on J springs. I did a little research on fox's site but don't know what I need as far as size goes. I like the look of the remote oil rez and would like those. I would also have to get the eye-eye adapters...I see a lot of people running the OME and Blistines but have not seen any pics of 80's on fox shocks.

I know they will be pricey but I am really impressed with there mountain bike products so I think they would be worth it.


What Fox shocks do I need to be looking at for J's
 
Last edited:
I looked at FOX as my first choice but the specs won't fit the 80. you will crush the shock. you would have to open up the mounting (fabricate a lot).

I went w/ Bilstein 7100 as they offer a short body shock that fits the 80. The 7100 or 9100 is comparable to FOX and the only thing I could find that had appropriate compression/extension numbers.

You can look into the Sway-Away and Walker Evans remote resivoir FJCruiser rear shocks- they offer a 10" post-top mount that would work at all 4 corners of the 80. The valving would be soft but maybe you can adjust it.

If you want to stay w/ FOX and go custom, I would get the 2.5 RR shocks. they have quite a bit more performance than the 2.0's. Don't think you would NEED them but what the heck!
 
I'm not to the point of being able to fab much so looking for a bolt on solution. Sucks that Fox dose not make a shock that will just bolt on to the 80.

looks like the best bet is the 7100's then. Thanks for the info.
 
Before you make a decision, you may want to give them (Fox) a call. When we needed some upgraded shocks for a vehicle we were building, I guy I work with that pit's for them had them make exactly what we needed. Remote reservoir shocks with stock type polyurethane rings. According to most everyone I know that builds and works on race trucks, Fox and Bilstein aren't in the same league. Eventually, I plan on running Fox's all around on my rig as well.
 
hummm something to think about but I would imagine that custom built shocks from Fox would be well out of my price range...I'm thinking I can't spend more than $300 per shock at the high side I would prefer to keep it below $250 shipped...Would not hurt to call but I'm guessing i would be looking at $500 or so per shock.
 
Back
Top Bottom