For Sale / Wanted To Buy
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
FJ40 body parts
Pair of front fenders - pretty good, some bondo - $100
Pair of rear half doors - decent, some rust - $50
Pair of front doors - good condition, need minor work - $100
Windshield frame - good condition, glass cracked - $100
Pair of front fenders - pretty good, some bondo - $100
Pair of rear half doors - decent, some rust - $50
Pair of front doors - good condition, need minor work - $100
Windshield frame - good condition, glass cracked - $100
PM sent on fenders and rear doors.
Matt, a friend of mine at work is into classic cars, so I showed him yours. Here's what he said:
Sweeeet! Don’t have cash right now but in about a month I may be asking if he still has it.
Just let me know if/when you sell it.
Sweeeet! Don’t have cash right now but in about a month I may be asking if he still has it.
Just let me know if/when you sell it.
I am selling my '63 Chevy Biscayne Wagon
I dont want to do it, but we need to pay some bills and it will be too long before I have $ to finish working on her.
230 inline 6 with 3 on the tree, reupholstered interior, new floorpans, exterior paint is a 10 to 15 footer, its a good driver. Pulled the rear and Eastwood rustproofed as well as control arms and installed rear springs and pan hard last spring.
Extras include: 3rd row seat, Drop spindle disc brake kit, new springs front & rear, and adjustable pan hard bar. I also have some various trim, extra set of rims and other misc as this is my 3rd '63 chevy.
Needs:
Rear pinion seal.
Tune up/carb rebuild, I was planing on doing an engine and tranny swap eventually. (Wife wanted an auto.)
(Long term) Candy paint starting to fade some and clear is peeling in a few spots on the roof.
Asking $5K but will consider offers. Maybe fj40 + cash? but no non-running projects. (Just dont tell the wife I even mentioned a 40 in trade.)
Thanks! I may have a deal by then, I have a local guy who is offering $ + to do some work on my trucks, which I desperately need done and don't have time. So, I may have to go that route.
I am putting my 1995 FZJ-80 out there for sale. I will have some pics posted in the next few days, but here is the skinny on it. It is a 1995 with the OBD 1.5, I know that sounds screwy, but it is truth, I have the OBD II stuff, but it is before they required it. It is night shadow pearl (blue) has some scratches and trail rash on it, so it is not perfect on the exterior, it also has some "character" on the passenger rear quarter from when tellico was still open, and I attempted body work. It is unlocked, it needs a power steering pump (which I have, just have not put it on). It has a partially rebuilt (by me) engine that only has 124k on the motor, 220k on the odo, anyone on here probably saw my engine write up. It will come with an OME 2.5 lift and fairly new BFG 285's on it, stock bumper and what not. It runs fine, and all that.. Any ways, I am asking $4300 for club/mud members $5500 if you know anyone outside the community that wants one. PM or e-mail me jay.conkin@gmail.com
Toyota mini truck hi steer
Im goin full hydro so i no longer need this stuff. I have a complete toyota hi steer setup. Arms, tie rod and drag link. The tie rod already has a ram assist mount welded on it. I dont have a camera, so i apologize but i dont have pics, but it looks just like this
http://www.skymanufacturing.com/new/...duct.php?id=60
It is used but is in great shape. It costs $399 plus shipping new, i was thinking $250 shipped.
Will
Im goin full hydro so i no longer need this stuff. I have a complete toyota hi steer setup. Arms, tie rod and drag link. The tie rod already has a ram assist mount welded on it. I dont have a camera, so i apologize but i dont have pics, but it looks just like this
http://www.skymanufacturing.com/new/...duct.php?id=60
It is used but is in great shape. It costs $399 plus shipping new, i was thinking $250 shipped.
Will
Free 2f, will help load...
I have the 2F out of my brothers 60 if anyone wants it. I can help load it with the engine hoist in the next week, otherwise it's going to the scrapper.
I can remove the head if anyone wants just that, but it will cost you. We can talk about what is reasonable if anyone is interested.
It is complete minus all the acc. and carb/air cleaner. Not sure what needs to be replaced inside until it is stripped down. Could need a new crank, and at a minimum a complete rebuild, boring, and new rods/pistons/lifters/connector rods/etc.
If knowone is interested by next weekend, I will strip the manifolds, head, and oil pan off and sell seperately.
Thanks,
Jeremy
I have the 2F out of my brothers 60 if anyone wants it. I can help load it with the engine hoist in the next week, otherwise it's going to the scrapper.
I can remove the head if anyone wants just that, but it will cost you. We can talk about what is reasonable if anyone is interested.
It is complete minus all the acc. and carb/air cleaner. Not sure what needs to be replaced inside until it is stripped down. Could need a new crank, and at a minimum a complete rebuild, boring, and new rods/pistons/lifters/connector rods/etc.
If knowone is interested by next weekend, I will strip the manifolds, head, and oil pan off and sell seperately.
Thanks,
Jeremy
NICE enclosed Pace Legacy fiberglass trailer for sale. $4700 asking
UC members > willing to deal
In greensboro NC.
If someone wants it I guess I could deliver and finally get those tires to BOB
PMs work best for more info
OK folks, clearing room in Dad's garage under ultimatum that wifes car must be in the garage by summer. So here is your chance to own a used item that is better than new! If you thought Jon was good at keeping his stuff nice, wait till you meet pops. The biggest negative would be some white wax residue around the boltheads
+Rear fold down ramp w/ spring (cable) assist for closing; diamond plate covering
+Side entry door w/ spring limiter as well as latch to retain open and secure
+(4) interior tie downs flush mounted in floor
+Interior light as well as vent louvers
+15'' wheels, great rubber
+aluminum sideskirt upgrade;front diamond plate
+rear jackstands to unload without damaging door
+all doors lockable
The good:
seller is OCD about keeping stuff clean
this unit has been GARAGED! since new
Ive towed with it and it tows great (4cyl tacoma, 8 cyl four runner, diesel)
The Bad:
some wax residue around the boltheads
I cant afford it for the business right now
Harley also available and willing to make an incredible package deal!!!
UC members > willing to deal
In greensboro NC.
If someone wants it I guess I could deliver and finally get those tires to BOB
PMs work best for more info
OK folks, clearing room in Dad's garage under ultimatum that wifes car must be in the garage by summer. So here is your chance to own a used item that is better than new! If you thought Jon was good at keeping his stuff nice, wait till you meet pops. The biggest negative would be some white wax residue around the boltheads
+Rear fold down ramp w/ spring (cable) assist for closing; diamond plate covering
+Side entry door w/ spring limiter as well as latch to retain open and secure
+(4) interior tie downs flush mounted in floor
+Interior light as well as vent louvers
+15'' wheels, great rubber
+aluminum sideskirt upgrade;front diamond plate
+rear jackstands to unload without damaging door
+all doors lockable
The good:
seller is OCD about keeping stuff clean
this unit has been GARAGED! since new
Ive towed with it and it tows great (4cyl tacoma, 8 cyl four runner, diesel)
The Bad:
some wax residue around the boltheads
I cant afford it for the business right now
Harley also available and willing to make an incredible package deal!!!
....said harley
1997 Dyna Wide Glide
cam, piston, injectors, ignition, exhaust, chrome, work
New metzler tires, always garaged (and covered w/ batt tender)
$ is a tough one. Market sucks worse than old cruisers at the moment but this one is a gem. ONLY reason being sold is due to unsuccessful back surgery. Lots of mods so PM me for a full spec sheet but basically think fully built and never wheeled 40 with low miles stuck in a garage and your close.
over 26k invested, less than 26k miles, shooting for $10, 000
BUT what size are you and what do you need? Novice rider could walk away with a rediculous package. Leathers, helmets, covers, luggage, maintenance tools, trailer etc. The more you want the better deal you could get.
1997 Dyna Wide Glide
cam, piston, injectors, ignition, exhaust, chrome, work
New metzler tires, always garaged (and covered w/ batt tender)
$ is a tough one. Market sucks worse than old cruisers at the moment but this one is a gem. ONLY reason being sold is due to unsuccessful back surgery. Lots of mods so PM me for a full spec sheet but basically think fully built and never wheeled 40 with low miles stuck in a garage and your close.
over 26k invested, less than 26k miles, shooting for $10, 000
BUT what size are you and what do you need? Novice rider could walk away with a rediculous package. Leathers, helmets, covers, luggage, maintenance tools, trailer etc. The more you want the better deal you could get.
Sometime next month i need a set of used lift springs for my 60....looking for something no taller than 2-3" over stock height....even stock height aftermarket springs would be cool so long as i'm higher than the flat arch stockers that i have now.
Anyone got any collecting dust?
Anyone got any collecting dust?
Up for sale...
1. Front and Second row floor mats for Lexus LX470...brand new...only used two days...Gray Color $50
2. LX470 oem 16" alloy wheel with Michelin LTX mounted...it was the spare but I have 18" wheels all around now. $100
[STRIKE]
3. Lexus running boards with hardware[/STRIKE]
[STRIKE]
4. 4 Bridgestone Duelers 275x65x18[/STRIKE]
If anyone wants them might be time to get one of the Lowcountry guys to bring them up to GSMTR...if not we can work on something.
1. Front and Second row floor mats for Lexus LX470...brand new...only used two days...Gray Color $50
2. LX470 oem 16" alloy wheel with Michelin LTX mounted...it was the spare but I have 18" wheels all around now. $100
[STRIKE]
3. Lexus running boards with hardware[/STRIKE]
[STRIKE]
4. 4 Bridgestone Duelers 275x65x18[/STRIKE]
If anyone wants them might be time to get one of the Lowcountry guys to bring them up to GSMTR...if not we can work on something.
I still have the springs that came off my 62. They were in pretty good condition, but rusty with a few of the small leaves broken, prob good to make a hybrid pack you can have them if you come get them.
Hey guys,
I don't want to do it, but because I now have this LX450 and will soon have another RZR, I need an open trailer capable of hauling both at the same time. So, I'm going to sell my 2006 Brown Motorsports 24' Enclosed Trailer. If my LX450 wasn't lifted so high, it would fit in this trailer with the RZR, but it's too tall, unfortunately. A lower vehicle could definitely fit, though. Here are the specs:
1) 10,400 GVW Dual Axle
2) 24' Interior Box Length
3) 8' Interior Box Width
4) Lowest Point(Rear above Ramp) - 79"
5) Ceiling Height - 83"
6) Ceiling Height at Lights - 81.5"
7) Width Between Wheelwells - 81"
8) E-Track - 2 rows around both side walls and front wall
9) E-Track - 2 rows running full length of floor
10) Lots of E-Track Connectors - Didn't count, but over 18 and 4 2x4 mounts too
11) 4 Recessed D-Rings
12) Smooth Aluminum Sides w/ Stainless Steel Caps and Kick Panels
13) 2-5/16" Coupler
14) Brand New Spare Tire w/ cover
15) Tires about 1/2 tread left roughly
I'm asking $9,990 obo...If anyone has any questions, please don't hesitate to ask. I really have no idea what high end trailers like this sell for in this area...out in AZ where I bought this, they're very expensive to purchase, especially with the additional height. It's at my house in Deep Gap, NC.
Chris
I don't want to do it, but because I now have this LX450 and will soon have another RZR, I need an open trailer capable of hauling both at the same time. So, I'm going to sell my 2006 Brown Motorsports 24' Enclosed Trailer. If my LX450 wasn't lifted so high, it would fit in this trailer with the RZR, but it's too tall, unfortunately. A lower vehicle could definitely fit, though. Here are the specs:
1) 10,400 GVW Dual Axle
2) 24' Interior Box Length
3) 8' Interior Box Width
4) Lowest Point(Rear above Ramp) - 79"
5) Ceiling Height - 83"
6) Ceiling Height at Lights - 81.5"
7) Width Between Wheelwells - 81"
8) E-Track - 2 rows around both side walls and front wall
9) E-Track - 2 rows running full length of floor
10) Lots of E-Track Connectors - Didn't count, but over 18 and 4 2x4 mounts too
11) 4 Recessed D-Rings
12) Smooth Aluminum Sides w/ Stainless Steel Caps and Kick Panels
13) 2-5/16" Coupler
14) Brand New Spare Tire w/ cover
15) Tires about 1/2 tread left roughly
I'm asking $9,990 obo...If anyone has any questions, please don't hesitate to ask. I really have no idea what high end trailers like this sell for in this area...out in AZ where I bought this, they're very expensive to purchase, especially with the additional height. It's at my house in Deep Gap, NC.
Chris
Price lowered to $9,500 obo.Hey guys,
I don't want to do it, but because I now have this LX450 and will soon have another RZR, I need an open trailer capable of hauling both at the same time. So, I'm going to sell my 2006 Brown Motorsports 24' Enclosed Trailer. If my LX450 wasn't lifted so high, it would fit in this trailer with the RZR, but it's too tall, unfortunately. A lower vehicle could definitely fit, though. Here are the specs:
1) 10,400 GVW Dual Axle
2) 24' Interior Box Length
3) 8' Interior Box Width
4) Lowest Point(Rear above Ramp) - 79"
5) Ceiling Height - 83"
6) Ceiling Height at Lights - 81.5"
7) Width Between Wheelwells - 81"
8) E-Track - 2 rows around both side walls and front wall
9) E-Track - 2 rows running full length of floor
10) Lots of E-Track Connectors - Didn't count, but over 18 and 4 2x4 mounts too
11) 4 Recessed D-Rings
12) Smooth Aluminum Sides w/ Stainless Steel Caps and Kick Panels
13) 2-5/16" Coupler
14) Brand New Spare Tire w/ cover
15) Tires about 1/2 tread left roughly
I'm asking $9,990 obo...If anyone has any questions, please don't hesitate to ask. I really have no idea what high end trailers like this sell for in this area...out in AZ where I bought this, they're very expensive to purchase, especially with the additional height. It's at my house in Deep Gap, NC.
Chris
Chris
For Sale: IPOR 80 Series Rear Bumper
Sold 6/25/10
Sold 6/25/10
Last edited:
ohhhhh