Mpeagan: i still have it. Just PM me if your interested.
For Sale / Wanted To Buy
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I know that this is a long shot, but here goes.
I'm looking for 2 sets of 4.10/4.11 gears that someone took out of their 62 or 80 (this take 2 rear gears) for my 60.
Also looking for an auto-locker for the rear if you have one lying around.
Would also be interested in some longer than stock AI shackles and 2 OME front AAL's to make the front of the truck level.
Keeping my fingers crossed that someone has something. Thanks!
I'm looking for 2 sets of 4.10/4.11 gears that someone took out of their 62 or 80 (this take 2 rear gears) for my 60.
Also looking for an auto-locker for the rear if you have one lying around.
Would also be interested in some longer than stock AI shackles and 2 OME front AAL's to make the front of the truck level.
Keeping my fingers crossed that someone has something. Thanks!
Hey guys I know I disappeared for a while. Sold my 100 bout a month ago. Got a new smaller project now. I've got some used Limited-SR5 6 lug wheels for sale. 16"/7" caps and lug nuts. Great condition. $200.00 or obo. thx Tim
Last edited:
Hobart Handler 140 Mig Welder, $170obo, GA
I bought this unit from a buddy a couple years ago. He had severed the actual gun line so he chunked it and never got a replacement. You will need the actual mig gun, a clamp for the ground and the fittings if you want to run a tank. I'll consider meeting to deliver. Great deal for someone especially if you already have these pieces. $170obo.
Hobart Handler 140 Mig Welder
I bought this unit from a buddy a couple years ago. He had severed the actual gun line so he chunked it and never got a replacement. You will need the actual mig gun, a clamp for the ground and the fittings if you want to run a tank. I'll consider meeting to deliver. Great deal for someone especially if you already have these pieces. $170obo.
Hobart Handler 140 Mig Welder
98 100 Series for Sale in Asheville
I am now selling my 98 100 series TLC. Black/Grey Leather. 169,xxx miles. $10,500. This is the best vehicle I have ever owned and has been easy to maintain. Everything is right on the vehicle, including the leather (only minor wear on driver's leather with no tears, etc.) All the service done, with Timing Belt, Serpentine, and Water Pump done at 120k. New starter at 140k. Work done by Toyota. Only non-stock item is AT 285 Tires (Toyo), and those are in great shape too. Basically, ready to go! Third row included.
Selling in my continuing effort to reduce the fleet.
PM or call 828-606-9689.
I am now selling my 98 100 series TLC. Black/Grey Leather. 169,xxx miles. $10,500. This is the best vehicle I have ever owned and has been easy to maintain. Everything is right on the vehicle, including the leather (only minor wear on driver's leather with no tears, etc.) All the service done, with Timing Belt, Serpentine, and Water Pump done at 120k. New starter at 140k. Work done by Toyota. Only non-stock item is AT 285 Tires (Toyo), and those are in great shape too. Basically, ready to go! Third row included.
Selling in my continuing effort to reduce the fleet.
PM or call 828-606-9689.
Last edited:
Tim
Good to hear from you. Missed you at the last Asheville get together. Throw up some pics of the new project.
Carp
I have a set of shackles i bought to use on my 62, but went OME instead. I will get length tomorrow when i head back out to the shop. (edit: just read you want Anti Inversion. mine are just normal)
Dave
Good to hear from you. Missed you at the last Asheville get together. Throw up some pics of the new project.
Carp
I have a set of shackles i bought to use on my 62, but went OME instead. I will get length tomorrow when i head back out to the shop. (edit: just read you want Anti Inversion. mine are just normal)
Dave
Chuck!!! Where you at? Hop on it!
Ive got one bumper left that im trying to move out the shop. It has the D-Ring anchors welded on and comes with two new D-Ring anchors, the bumper is bare metal.
This is the bumper here. Martin Hovis
Asking $150 for the bumper+D-Rings
This is the bumper here. Martin Hovis
Asking $150 for the bumper+D-Rings
Got a set of Downey (not AI) won at a raffle in LC don't know where they are at the moment but you can have them if they will work for you! Think they are 2 inches longer than stock.
80 series bumper needed. It's for a 96 FZJ80 if that matters.
i have a 96 gray 80 series bumper that I will have no need for after I get my new Metal Tech bumper next week.
Capt'n Jim has saved the day! Thanks for the great offers guys. Jim's headed my way today witha bumper.
God, I love the resources of this club.
God, I love the resources of this club.
Stuff I have that I need to get rid off.
I thought I would post up some stuff that I have taking up space in my garage that I would like to get rid of. If you see something, let me know.
I have the following:
Stock 80 springs and other components (links, control arms, etc)
SR5 Chrome 15x7 wheels off an 85 4Runner (5 total)
Marlin Crawler steering stabilizer kit for a mini truck/4Runner high steer kit
80 series sunroof wind deflector
80 series stock floor mats (gray)
Engine stand on casters
80 series stock rear bumper
80 series stock front bumper
I have attached some pictures. Thanks for looking.
I thought I would post up some stuff that I have taking up space in my garage that I would like to get rid of. If you see something, let me know.
I have the following:
Stock 80 springs and other components (links, control arms, etc)
SR5 Chrome 15x7 wheels off an 85 4Runner (5 total)
Marlin Crawler steering stabilizer kit for a mini truck/4Runner high steer kit
80 series sunroof wind deflector
80 series stock floor mats (gray)
Engine stand on casters
80 series stock rear bumper
80 series stock front bumper
I have attached some pictures. Thanks for looking.
PM sent about these items.
2F and misc other parts PRICES DROPPED
I dropped my prices. You pay price of shipping if we can't "UC ship."
Make an offer. If these don't sell I'll clean them up and take them to the GSMTR parts swap.
1983 FJ60 2F Parts
These parts came off of a motor I bought as a rebuild core. Anything listed below was not driven in a truck but the PO was able to crank the motor outside of the 60.
Charcoal canister mount $5
Fan clutch $25
Fan $5
Coolant overflow bottle $5
Engine mounts - brand new paint $15 each
Alternator - shape unknown - not OEM - consider a core $10
Oil pump $25
PS pump reservoir $10
AC compressor? plus additional AC parts - what are these worth?
Fan shroud $10
Valve cover - brand new paint - nice $40
1976 FJ55 2F Parts
Everything below came off of my Pig and worked fine. The engine went south b/c of a bad crank and harmonic balancer. There were no other issues that I know of.
4 main bearing caps $10
Fuel pump $20
Oil pan $40
Side cover - non dented $5
Clutch inspection cover $10
Timing gear cover $10
Oil pump $20
[STRIKE]Exhaust manifold - frozen flapper $30 SOLD[/STRIKE]
[STRIKE]Valve train $25 SOLD[/STRIKE]
[STRIKE]Head - desmogged - bottom of valve seats 'peened' - you want pics - has good parts $15 (shipping would suck) SOLD[/STRIKE]
Push rods - 12 total, 2 are smaller diameter on the top $10
Speedo housing $20
Water pump - low miles $50
Oil filter mount $5
[STRIKE]Thermostat housing - 1 broken bolt $15 SOLD[/STRIKE]
Starter - non gear reduction $10
[STRIKE]Bell housing $15 SOLD[/STRIKE]
12 lifters $10
6 pistons - engine rebuilder said these were good $50
Misc Parts
4 drum shoes - good shape $20 for all
4 drum brake cylinders - 1 leaked when removed $30 all
[STRIKE]2 clutch forks $5 each - SOLD[/STRIKE]
[STRIKE]Exhaust manifold - unknown year - weak flapper $30 SOLD[/STRIKE]
2 drum rotors $10 for the pair
[STRIKE]1 Flywheel $20 SOLD[/STRIKE]
Clutch and plate - 1 set $25
Mini truck PS pump (small dent in pulley) $20
Misc smog parts I need to dig through
I dropped my prices. You pay price of shipping if we can't "UC ship."
Make an offer. If these don't sell I'll clean them up and take them to the GSMTR parts swap.
1983 FJ60 2F Parts
These parts came off of a motor I bought as a rebuild core. Anything listed below was not driven in a truck but the PO was able to crank the motor outside of the 60.
Charcoal canister mount $5
Fan clutch $25
Fan $5
Coolant overflow bottle $5
Engine mounts - brand new paint $15 each
Alternator - shape unknown - not OEM - consider a core $10
Oil pump $25
PS pump reservoir $10
AC compressor? plus additional AC parts - what are these worth?
Fan shroud $10
Valve cover - brand new paint - nice $40
1976 FJ55 2F Parts
Everything below came off of my Pig and worked fine. The engine went south b/c of a bad crank and harmonic balancer. There were no other issues that I know of.
4 main bearing caps $10
Fuel pump $20
Oil pan $40
Side cover - non dented $5
Clutch inspection cover $10
Timing gear cover $10
Oil pump $20
[STRIKE]Exhaust manifold - frozen flapper $30 SOLD[/STRIKE]
[STRIKE]Valve train $25 SOLD[/STRIKE]
[STRIKE]Head - desmogged - bottom of valve seats 'peened' - you want pics - has good parts $15 (shipping would suck) SOLD[/STRIKE]
Push rods - 12 total, 2 are smaller diameter on the top $10
Speedo housing $20
Water pump - low miles $50
Oil filter mount $5
[STRIKE]Thermostat housing - 1 broken bolt $15 SOLD[/STRIKE]
Starter - non gear reduction $10
[STRIKE]Bell housing $15 SOLD[/STRIKE]
12 lifters $10
6 pistons - engine rebuilder said these were good $50
Misc Parts
4 drum shoes - good shape $20 for all
4 drum brake cylinders - 1 leaked when removed $30 all
[STRIKE]2 clutch forks $5 each - SOLD[/STRIKE]
[STRIKE]Exhaust manifold - unknown year - weak flapper $30 SOLD[/STRIKE]
2 drum rotors $10 for the pair
[STRIKE]1 Flywheel $20 SOLD[/STRIKE]
Clutch and plate - 1 set $25
Mini truck PS pump (small dent in pulley) $20
Misc smog parts I need to dig through
Last edited:
Steve PM sent.
Doc, PM sent
I still have a 2F that I'm trying to get rid of to a UC member. It needs a rebuild.
I paid 3 six packs of beer from a UC member so that is what I am asking - and no Alex, you can't keep it in my garage.
PS: I get to choose the beer!
I paid 3 six packs of beer from a UC member so that is what I am asking - and no Alex, you can't keep it in my garage.
PS: I get to choose the beer!
I still have a 2F that I'm trying to get rid of to a UC member. It needs a rebuild.
I paid 3 six packs of beer from a UC member so that is what I am asking - and no Alex, you can't keep it in my garage.
PS: I get to choose the beer!
I'll give you a case if you can talk Marshall into building me a "red and black" big gay for SORF.