For Sale / Wanted To Buy
- Thread starter ClemsonCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
There is a white 1993 FJ80 in Easley for sale. It's got a decent lift, 305/70R16 BFG Mud Terrains, ARB front bumper, winch, lightforce fogs, rear bumper with quarter armor and tire swing out, and the famous front and rear diff locks. The Cruiser's got 183k and the guy is asking $13,000. 918-9616 I know nothing else of this Cruiser, saw it on the side of the road, thought I'd pass it along.
wheels and tires for sale 2 sets
(5) 35'' Truxs MT's on 80 series wheels.........wheels in good condition, light trail haze, no gouging at all
tires in great shape, less than 6k miles, rotated ea 2500
asking 1400 obo for the combo (tires alone were 1600 in JAN 08)
(4) 315 BFG AT's on tundra sequoia wheels...Wheels in LIKE NEW condition, no wear visible, hypersilver
Tires in like new condition as well, less than 2000k miles (closer to 1000)
asking 1200 obo for the combo (again tires alone more than this)
both sets come w/ a transferable warranty for replacement and lifetime rotate/balance from Discount Tire
Tires are in great shape, basically asking a lil less than new price, and you get a free set of sought after wheels
ask away if you got ?'s or offers (pms get the quickest attention)
(5) 35'' Truxs MT's on 80 series wheels.........wheels in good condition, light trail haze, no gouging at all
tires in great shape, less than 6k miles, rotated ea 2500
asking 1400 obo for the combo (tires alone were 1600 in JAN 08)
(4) 315 BFG AT's on tundra sequoia wheels...Wheels in LIKE NEW condition, no wear visible, hypersilver
Tires in like new condition as well, less than 2000k miles (closer to 1000)
asking 1200 obo for the combo (again tires alone more than this)
both sets come w/ a transferable warranty for replacement and lifetime rotate/balance from Discount Tire
Tires are in great shape, basically asking a lil less than new price, and you get a free set of sought after wheels
ask away if you got ?'s or offers (pms get the quickest attention)
Last edited:
Fj80 For Sale in Fountain Inn
Hi all, I have a 91 FJ80 I will be selling in Fountain Inn, SC. I have not owned it for very long but due to family needs will need to be sold.
Mostly stock, two tone champagne and brown, Bilstiens, no lift but nice controlled ride. All doors shut tight, cruise works, shifts well, some leaks, wimpy brush guard and roof carrier. Tires are 32x11.50x15 Dayton Timberline A/T's. PO removed Cats. I am however at this moment replacing the front calipers , pads, M/C and rear whl cyls. If you want more info email me at navistarpartsman@bellsouth.net I don't always have time to check this site. But I can check email at work. If your close leave me a Ph# and I will call you back.
Price $5800.00 or make me a good offer.
I love this truck but already have a 92' so I guess I can let this go.
If you want more pics ( I'm sure you will; e-mail me )
Chris
Hi all, I have a 91 FJ80 I will be selling in Fountain Inn, SC. I have not owned it for very long but due to family needs will need to be sold.
Mostly stock, two tone champagne and brown, Bilstiens, no lift but nice controlled ride. All doors shut tight, cruise works, shifts well, some leaks, wimpy brush guard and roof carrier. Tires are 32x11.50x15 Dayton Timberline A/T's. PO removed Cats. I am however at this moment replacing the front calipers , pads, M/C and rear whl cyls. If you want more info email me at navistarpartsman@bellsouth.net I don't always have time to check this site. But I can check email at work. If your close leave me a Ph# and I will call you back.Price $5800.00 or make me a good offer.
I love this truck but already have a 92' so I guess I can let this go.
If you want more pics ( I'm sure you will; e-mail me )
Chris
FYI
there is a black, '93 Taco for sale that I see on the way into work. Don't know the seller, but it looks to be in pretty good shape.
There is a thin looking skid angled up from under to the front crossmember (no bumper), it has litlte vents in the middle. It's lifted probably 4-6" Also shiny tube rails, ball hitch, BFG a/t, front locker, 2 hellas on front. 404-437-9726
If anyone is curious, I'll stop and get a couple pics.
there is a black, '93 Taco for sale that I see on the way into work. Don't know the seller, but it looks to be in pretty good shape.
There is a thin looking skid angled up from under to the front crossmember (no bumper), it has litlte vents in the middle. It's lifted probably 4-6" Also shiny tube rails, ball hitch, BFG a/t, front locker, 2 hellas on front. 404-437-9726
If anyone is curious, I'll stop and get a couple pics.
Need to get rid of some 60 parts
Slight repost/update. I need to make some room in my garage (it is starting to look like Trolls). I want this stuff gone.
All parts are from a 1983 FJ60 with factory air. I have pics of most things now or can take pics and provide upon request.
PS pump - $30
Hood latch and cross brace thingy that goes above radiator - $5
Radiator - needs a good flush - $30
Radiator overflow bottle - $5
Driver side splash guard - $5
Smog Pump - $20
Charcoal canister - $5
Several AC parts
Fan shroud - $5
Rear axle w/ third (3.73 I believe) and drums - one wheel cylinder is probably leaking, leafs and ~3 inch lift blocks - $85
Have some AC parts - let me know what you need.
Slight repost/update. I need to make some room in my garage (it is starting to look like Trolls). I want this stuff gone.
All parts are from a 1983 FJ60 with factory air. I have pics of most things now or can take pics and provide upon request.
PS pump - $30
Hood latch and cross brace thingy that goes above radiator - $5
Radiator - needs a good flush - $30
Radiator overflow bottle - $5
Driver side splash guard - $5
Smog Pump - $20
Charcoal canister - $5
Several AC parts
Fan shroud - $5
Rear axle w/ third (3.73 I believe) and drums - one wheel cylinder is probably leaking, leafs and ~3 inch lift blocks - $85
Have some AC parts - let me know what you need.
Last edited:
Hey Steve do you have the A/C lines that go from the condenser to the front of the cooler? And how much of the p/s stuff do you have?
Thanks, Chuck
Thanks, Chuck
I thought the P/S box was sold? And is the rad i good shape? I noticed a few pin holes in mine....
I don't think I have the line you want. The only p/s stuff I have left is the pump. The gear box is sold.
Corrected my post. Sorry, I meant the pump. The gear box is sold.
I do not know what type of shape the rad is in. When I pulled it there were a few rust flakes in the bottom where the line attached. You are welcome to check it out. If its scrap then its free.
Is any one interested in oxy-acetylene tanks? I have an oxy-90 and an ace-60. I am goign to keep my torch., but I'd rather not haul the tanks back to VT if I can avoid it. I bought these 6 months ago at Machine and Welding Supply in greenville. Basically, once you buy the tanks you just exchange them for refills. They're both about 30% full. Just looking to get out what I paid for the tanks, about $300 IIRC. I'll dig up the receipt. For anyone about to start a project, a torch is a must have!!
What company Nat welders?
I'm not sure, Machine and Welding Supply Co. is stamped on them. When I bought them, they assured me they could be exchanged anywhere. I have some paper work to go with them.
I found the receipt. They were $280 before tax, so that's what I'll sell them for.
62 T-case
Does anybody have or know of a T-case for an 89 62 in good condition for sale? I have to either rebuild or replace. Any suggesstions? Thanks.
Does anybody have or know of a T-case for an 89 62 in good condition for sale? I have to either rebuild or replace. Any suggesstions? Thanks.
I need an air intake hose- is it in good condition?
Is the Ipor bumper still available? How is that spindle?- Do you just set it on there with grease?What keeps it from bouncing around just the weight?
I'll check it out tonight.
Not my bumper but I made a bumper with their spindle. The spindle has a grease impregnated bushing. It fits tight and then you have a collar that fastens to the top. It works nice and is beefy if it is the same spindle I have.
Ok so it just needs to be cleaned up and greased- thanks for the info- let me know on the intake.
thanks
thanks