what's your best price on the radio?
For Sale/Wanted thread
- Thread starter richxd87
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hi All,
Just noticed the Bayou City group here on mud. Thought I say hello live in the Pearland area.
I have some parts for best offers.
Looking locally for:
Thanks everyone!
Just noticed the Bayou City group here on mud. Thought I say hello live in the Pearland area.
I have some parts for best offers.
- 2001 complete non-locked 100 series axle with 64k miles. There is something wrong with the driver side inner axle, seems like it was replaced at some point and the inner seal is leaking I dont think it was installed properly. I have a thread on here that explains some details about it. I didn't want to mess with it and just purchased a locked axle and did a swap. Best offer on this.
- Stock running boards in gray color best offer.
- Whale fin spoiler trade for a third brake light.
- Toyota OEM hood deflector in great condition.
Looking locally for:
- Third brake light
- Rear slee bumper
- adjustable Pan hard
- Diff drop
Thanks everyone!
Shot you a PM about the whale fin.
I have the following items for sale and will give a great deal to local members.
I have a couple of things for sale on a 100 series that are laying around.
Rear Fox 2.0 IFP Smooth Body shocks for 100 series - $100 These were sent to Fox to replace the seals and tuned the valving for a 100 series with rear bumper and drawers less than 5,000 miles ago
Bilstien front shocks - $50
Passenger side OEM head light with corner light - $100
Wet Okole grey seat covers - $100. These come with the tops, bottoms, head rest, and arm rest covers. In good condition, it does have one hole. I stole the below picture from the internet
View attachment 1137106
I have a couple of things for sale on a 100 series that are laying around.
Rear Fox 2.0 IFP Smooth Body shocks for 100 series - $100 These were sent to Fox to replace the seals and tuned the valving for a 100 series with rear bumper and drawers less than 5,000 miles ago
Bilstien front shocks - $50
Passenger side OEM head light with corner light - $100
Wet Okole grey seat covers - $100. These come with the tops, bottoms, head rest, and arm rest covers. In good condition, it does have one hole. I stole the below picture from the internet
View attachment 1137106
Cross posting for @scotia
~~~~~~~~~~~~~~~~~~
I have both the front and rear bumpers in Classic Silver Metallic, 2006 100 series LC..... NOT LX. They are low mileage(76k) and super clean. Front has working foglamps still in it. Rear has internal metal crumple panel and foam insert. Have all the hardware as well. $250 for all of it. Prefer local pickup in Houston TX for obvious reasons.
~~~~~~~~~~~~~~~~~~
Message him if interested
Original Post
~~~~~~~~~~~~~~~~~~
I have both the front and rear bumpers in Classic Silver Metallic, 2006 100 series LC..... NOT LX. They are low mileage(76k) and super clean. Front has working foglamps still in it. Rear has internal metal crumple panel and foam insert. Have all the hardware as well. $250 for all of it. Prefer local pickup in Houston TX for obvious reasons.
~~~~~~~~~~~~~~~~~~
Message him if interested
Original Post
I have a brand new in box Weathertech cargo liner in black. Bought it a few months ago, but didn't have a chance to send it back. P/N 40124
$100 obo
$100 obo
Last edited:
FS Recently Rebuilt H42. Also have the adapter (AA 712532) to mount to a sbc v8. $100obo for the tran. Can work out a deal for the package or sold separately
Also bunch of misc parts from v8 swap. Located near downtown Houston.
EDIT: adapter is sold.
Also bunch of misc parts from v8 swap. Located near downtown Houston.
EDIT: adapter is sold.
Last edited:
Looking for an 80 series front left marker light, and the body strip that goes across under the headlamps/grille, for a 93-97 LC (not LX)
I dont get into this subforum often, so best way to contact me is via PM.
I dont get into this subforum often, so best way to contact me is via PM.
Swapped out the spare so now have full set of 5 OEM 18" wheels from a 2013 LC plus centercaps and lugnuts.
$500 for the set.
For Sale: - (4) 2013 200 Series 18" Land Cruiser wheels including centercaps and lugnuts
$500 for the set.
For Sale: - (4) 2013 200 Series 18" Land Cruiser wheels including centercaps and lugnuts
I have been toying with building different designs of drawers, the outcome of it all has left me with 2 different drawer designs that I will not be using and are up for grabs, only giving away part of the first design. The first one is a steel frame was initially welded to hold one large drawer but after almost finishing the project I realized I did not like the fact that the drawer would be too large and I would be walking around it and over reaching to get stuff from the back of the drawer.
This has left me with a steel frame that fits nicely inside the back of a 100 series without third row and if you throw a piece of plywood on top you are leveled across the seats for a nice flat bed foundation. I recommend it for this use and not for a drawer as I mentioned earlier it makes for kind of an annoying setup for a large drawer. Selling the frame and plywood top, drawer was destroyed in a rage.
Please note i'm a beginner welder so welds are nowhere near perfect, but I jumped on the frame with the plywood and it didn't even flex. The picture is missing the triple square tubbing rails bolted to the side.
Would just like to get the material worth back on this so asking $80 obo
This has left me with a steel frame that fits nicely inside the back of a 100 series without third row and if you throw a piece of plywood on top you are leveled across the seats for a nice flat bed foundation. I recommend it for this use and not for a drawer as I mentioned earlier it makes for kind of an annoying setup for a large drawer. Selling the frame and plywood top, drawer was destroyed in a rage.
Please note i'm a beginner welder so welds are nowhere near perfect, but I jumped on the frame with the plywood and it didn't even flex. The picture is missing the triple square tubbing rails bolted to the side.
Would just like to get the material worth back on this so asking $80 obo
1988 FJ62 Stock Exhaust
I have the stock exhaust system off a 1988 FJ62 from manifold back. Exhaust manifold $50 each or $80 for the pair. OBO.
Pipes, make offer
Also have also have the clutch components(master cylinder, pedal etc). I'm going auto so no need for these. OBO. I have a brand new cylinder and a used one in good condition.
I have the stock exhaust system off a 1988 FJ62 from manifold back. Exhaust manifold $50 each or $80 for the pair. OBO.
Pipes, make offer
Also have also have the clutch components(master cylinder, pedal etc). I'm going auto so no need for these. OBO. I have a brand new cylinder and a used one in good condition.
FS Add A Leafs for FJ60/FJ62...I'm sure I need a price here but I'd like to trade for something I need cruiser related(not sure what, but I'm doing a v8 swap into a FJ62 or suspension components like shackles etc.) $125obo? These are brand new.
Swap parts I need are a good battery, SBC 140amp alternator, shifters, aluminum radiator, hi steer linkage....This post/trade goes for anything in my garage I've previously listed.
Swap parts I need are a good battery, SBC 140amp alternator, shifters, aluminum radiator, hi steer linkage....This post/trade goes for anything in my garage I've previously listed.
For anyone preparing to do monstaliner or bedliner. Includes almost the entire monstaliner kit of rollers / prep items plus mini-roller set and 100 ft of high quality WireTrim tape (Langeman).
$30
For Sale: - Langeman WireTrim tape + Monstaliner install kit (Houston)
$30
For Sale: - Langeman WireTrim tape + Monstaliner install kit (Houston)
WTB: wheels and/or tires. 16s or 17s. Aluminum. Tires 33-35 flavor. AT or MT.
Well, I ended up having surgery and will be down for around 6 months. I had picked up a 1988 FJ62 to install a v8 into. The fj62 is in pretty amazing shape. The only problem with it is a ding in quarter panel. I'm located near downtown Houston. I have a Chevy 5.7l v8 with matching 4l60e that came out of the same 2wd running Chevy. I have all wiring, a garage full of parts to go with it from both the fj62 and the Chevy. I have all drive shafts. Have a split case bolted to a 4 speed transmission out of a 87 fj60. Doesnt leak. Need gone asap. Willing to work on price. All it needs an adapter or a 3fe. The original 3fe block busted. I also have hi steer arms for a future SOA, brand new in box clutch master cylinder. Brakes work on it. Is a perfect body, just needs the engine transplant.
$2750 Obo. Located near downtown Houston. Search "Lucille" and you'll see the thread I started with pics of it.
$2750 Obo. Located near downtown Houston. Search "Lucille" and you'll see the thread I started with pics of it.
Ready for that whale fin swap when you are ready Duggy