For Sale / Wanted / Free / Trade
- Thread starter RSHARPfzj80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
He'll let you make your own mark with the sharpie
I saw this while browsing.
I contacted the seller, he seems to be a real person. said he has never heard of ih8mud.
http://nashville.craigslist.org/cto/4529473898.html
I contacted the seller, he seems to be a real person. said he has never heard of ih8mud.
http://nashville.craigslist.org/cto/4529473898.html
Stuff I'm offloading.
All prices are negotiable, All offers will be considered, Local pick up would be preferred and more than willing to meet anywhere around Georgia, Alabama, Tennessee, North/South Carolina. I'll be more than happy to ship any item at the purchasers expense. I Guess I'm limited to 5 Pics Let me know if y'all have any questions or would like to see pics of anything specific I got a bunch.
I have a 2F PO spun a bearing, I don't believe it overheated, I haven't been into it at all, The head is in great shape, valve train is very clean. Block looks good. $350.00
I have another 1980 2F that was been completely disassembled for a rebuild, Everything has been bagged and tagged, Bearing caps, Pistons and rods have been stamped for reassembly. This was a running motor prior to being pulled approximately 160-170 K all the parts look to be in good condition in need of cleaning and a rebuild. $450.00
Bell Housing and Fly Wheel $45.00
1980 H42 4 Speed $175.00
1980 Split Transfer Case (Disassembled for Rebuild) $225.00
2F Carb Insulator Plate $35.00
1980 Carb (Needs Rebuild) $125.00
Intake Manifold $150.00
(2) FJ60 Long 30 Spline Axle Shafts $40.00 Ea.
(1) FJ60 Short 30 Spline Axle Shafts $25.00 Ea.
Left and Right Front Seats $50.00 Ea.
Rear Seat Upper $175.00
Rear Seat Lower $100.00
Dual Battery Mount (Optima or similar size AGM) $50.00
All prices are negotiable, All offers will be considered, Local pick up would be preferred and more than willing to meet anywhere around Georgia, Alabama, Tennessee, North/South Carolina. I'll be more than happy to ship any item at the purchasers expense. I Guess I'm limited to 5 Pics Let me know if y'all have any questions or would like to see pics of anything specific I got a bunch.
I have a 2F PO spun a bearing, I don't believe it overheated, I haven't been into it at all, The head is in great shape, valve train is very clean. Block looks good. $350.00
I have another 1980 2F that was been completely disassembled for a rebuild, Everything has been bagged and tagged, Bearing caps, Pistons and rods have been stamped for reassembly. This was a running motor prior to being pulled approximately 160-170 K all the parts look to be in good condition in need of cleaning and a rebuild. $450.00
Bell Housing and Fly Wheel $45.00
1980 H42 4 Speed $175.00
1980 Split Transfer Case (Disassembled for Rebuild) $225.00
2F Carb Insulator Plate $35.00
1980 Carb (Needs Rebuild) $125.00
Intake Manifold $150.00
(2) FJ60 Long 30 Spline Axle Shafts $40.00 Ea.
(1) FJ60 Short 30 Spline Axle Shafts $25.00 Ea.
Left and Right Front Seats $50.00 Ea.
Rear Seat Upper $175.00
Rear Seat Lower $100.00
Dual Battery Mount (Optima or similar size AGM) $50.00
I am in the market for a set of knuckles, manual hubs and cv's from a 1st gen tacoma 96-04. If anyone knows anybody doing a SAS or parting one, let me know.
Thanks
Thanks
I'm thinking about getting a trailer I can mount a RTT to. Let me know if you know of anything local.
- Thread starter
- #147
I don't know. I definitely don't want to spend a lot and I don't want to restore anything. I just want a RTT and I don't want to put it on the roof since the 100 is a DD and neither it or the 62 would fit in the garage with it installed. I want to hitch it up to either cruiser and go camping. Is that too many rules?
This a custom build and I think it's perfect. If someone is willing to teach me to weld and let me use their gear, I'd give it a try. I could probably still find the build thread on yotatech forum. There's a guy with a 40 who did a very similar build here on mud.
I would probably make the axle fit the 100 rims since that one will belong to us longer than the 62.
I would probably make the axle fit the 100 rims since that one will belong to us longer than the 62.
- Thread starter
- #150
I'm in need of (4) wheel spacers 1/2"-1".
TLCA #13178 Appalachia Cruisers, STLCA
TLCA #13178 Appalachia Cruisers, STLCA
Putting this out there for MUD members as we don't care for the hassel of CL right now, but Erin is thinking about selling her Sami.
Specs:
1988 Suzuki Samurai
Propane Conversion - 2 40# tanks included
Spring over conversion with new OME 2" springs all around
Completely rebuilt rearend
SKY high steering conversion
NEON buckets
30x9.50-15 TSL SX Bias tires
4.16 T-case gears with Twisted TT shift rails
Essentially Off-Road Sliders
New Bosal Exhaust
Build thread is here for those who might have missed it: https://forum.ih8mud.com/threads/brownie-gets-a-new-mom-and-dad-erins-sami-build.765043/
Got a complete front end knuckle rebuild kit in the box and I am sure there are other things that would go with it as well.
It isn't tagged and would need signals and brake lights to be street legal, but that could be done relatively easily if that was a deal breaker.
$4000.00
Specs:
1988 Suzuki Samurai
Propane Conversion - 2 40# tanks included
Spring over conversion with new OME 2" springs all around
Completely rebuilt rearend
SKY high steering conversion
NEON buckets
30x9.50-15 TSL SX Bias tires
4.16 T-case gears with Twisted TT shift rails
Essentially Off-Road Sliders
New Bosal Exhaust
Build thread is here for those who might have missed it: https://forum.ih8mud.com/threads/brownie-gets-a-new-mom-and-dad-erins-sami-build.765043/
Got a complete front end knuckle rebuild kit in the box and I am sure there are other things that would go with it as well.
It isn't tagged and would need signals and brake lights to be street legal, but that could be done relatively easily if that was a deal breaker.
$4000.00
That'd be a neat side project, but I gots too many myself to be taking on more, besides I'm too far away anyway. Need someone local that you can converse with during the process. Will keep an eye out for what you end up with.
SOLD
I have a Marlin Crawler rebuild kit for a SF 9.5" rear axle. Should fit 40/60 and early 80 (73-92) if anyone is interested.
Marlin site: https://www.marlincrawler.com/axle/rear-axle-parts/land-cruiser-rear-axle-rebuild-kit
Been sitting on a shelf still in the original packaging. I never opened it since I decided to do the FF swap. $30 plus the ride if anyone is interested.
I have a Marlin Crawler rebuild kit for a SF 9.5" rear axle. Should fit 40/60 and early 80 (73-92) if anyone is interested.
Marlin site: https://www.marlincrawler.com/axle/rear-axle-parts/land-cruiser-rear-axle-rebuild-kit
Been sitting on a shelf still in the original packaging. I never opened it since I decided to do the FF swap. $30 plus the ride if anyone is interested.
Last edited:
I'd be interested in that kit. Where are you located?
Text me and let me know where you live. Definitely interested. 631-335-6179. I'm not far from Knoxville.
I weld but nothing on that small of a scale. Do you have the pieces cut out already? If so, I might be able to pick them up and take them to the base with me and TIG weld them there. What size diameter are they and what type of material?