He has just the spot in the barn to hoard them.
97 4runner
86 4runner
STLCA
APPALACHIA CRUISERS
For Sale / Wanted / Free / Trade
- Thread starter RSHARPfzj80
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
He has just the spot in the barn to hoard them.
97 4runner
86 4runner
STLCA
APPALACHIA CRUISERS
D@m. Rance, if you don't use them, or have a immediate home for them, then I would like to have them. I was telling Erin I needed to get some for the 80 yesterday. I was just a little too slow on this one.
He don't have time to go to the f#c£in mailbox but he's got a ton of time to camp out on mud and snag all the free shat!!
Guess we all have to get up a little earlier to get the jump on the master hoarder!!
- Thread starter
- #104
Don't be a hater! I posted up 3 hours after Joe posted it. Looks to me like everyone had their chance. Thanks Joe
- Thread starter
- #106
Jason has a set.....
- Thread starter
- #107
I'm trying to get an idea what these tires and wheels are worth. Super Swamper TSL/SX 36-12.50x15. Thoughts????
I'm with Jason. I'll give you $10.00/$12.00.
Cucv trade for cruiser!
Hey guys how's it goin? Wanting to trade my solid 1984 CUCV M1008 for a good running cruiser. Any you guys have one for trade or know where one would be?
6.2L j-code/military engine
TH400
Dana 60 front 4.56
14bolt full floater rear with Detroit locker 4.56
24v electrical which works perfect
It has 109k on the clock,about 20k on new engine.
34inch Bfg km2 tires 75%
I converted the dual exhaust into a 3inch single side front of the tire exit for more keeping the back pressure but taking that "poppy" sound out.
I also turned the fuel delivery up about 1/4 turn and advanced the pump timing one degree.
Has new wheel bearings in the front.
All the fluids were flushed and synthetic was added.except the motor where delvac is used.
New pads on the front and shoes on rear.
My uncle picked the truck up from Richmond va national guard where he found out that the engine was replaced. I was under the suspicion that it had been replaced seeings how clean the engine was compared to the other cucv's I have owned.
It runs GREAT runs strong. Gets 22mpg if you keep the rpms down.
Mainly looking for a fjz80 but would be interested in 91-92 fj80 with some mods and accessories(tires bumpers wheels winch etc would be great!) Also would be interested in a solid fj60 or maybe a solid fj40.
Let me know what ya have!
423-489-6136 call or text me anytime!
I can text pictures on request. I'm located up near tazewell Tn
Thanks,Chad
Hey guys how's it goin? Wanting to trade my solid 1984 CUCV M1008 for a good running cruiser. Any you guys have one for trade or know where one would be?
6.2L j-code/military engine
TH400
Dana 60 front 4.56
14bolt full floater rear with Detroit locker 4.56
24v electrical which works perfect
It has 109k on the clock,about 20k on new engine.
34inch Bfg km2 tires 75%
I converted the dual exhaust into a 3inch single side front of the tire exit for more keeping the back pressure but taking that "poppy" sound out.
I also turned the fuel delivery up about 1/4 turn and advanced the pump timing one degree.
Has new wheel bearings in the front.
All the fluids were flushed and synthetic was added.except the motor where delvac is used.
New pads on the front and shoes on rear.
My uncle picked the truck up from Richmond va national guard where he found out that the engine was replaced. I was under the suspicion that it had been replaced seeings how clean the engine was compared to the other cucv's I have owned.
It runs GREAT runs strong. Gets 22mpg if you keep the rpms down.
Mainly looking for a fjz80 but would be interested in 91-92 fj80 with some mods and accessories(tires bumpers wheels winch etc would be great!) Also would be interested in a solid fj60 or maybe a solid fj40.
Let me know what ya have!
423-489-6136 call or text me anytime!
I can text pictures on request. I'm located up near tazewell Tn
Thanks,Chad
...via IH8MUD app
(Tan) Set of FJ60 SOR Tuff Duck Seat Covers
$165 shipped/$150 local pickup
Photos in this thread...https://forum.ih8mud.com/sale-parts...-duck-covers-tan-165-shipped.html#post9062368
$165 shipped/$150 local pickup
Photos in this thread...https://forum.ih8mud.com/sale-parts...-duck-covers-tan-165-shipped.html#post9062368
I found a good deal on a Prolink.
But, I'm still looking for a good bracket for a 10 lb Co2 on board air tank (7 inch diameter).
Let me know what you've got one that you'll sell. I'll need it shipped to 37167.
Edit: found that too. Bought a HD fire extinguisher bracket. Found such a good deal that I bought 2.
But, I'm still looking for a good bracket for a 10 lb Co2 on board air tank (7 inch diameter).
Let me know what you've got one that you'll sell. I'll need it shipped to 37167.
Edit: found that too. Bought a HD fire extinguisher bracket. Found such a good deal that I bought 2.
Last edited:
*** SOLD ***
FOR SALE...
Feb. 1983 FJ60. Purchased Aug. 2005 with 198k miles. 2F still running well. H42 still shifting fine. 4WD works well. Never had any major mech issues in the time I've owned it. Currently the carb needs cleaned or adjusted, requires a little choke to idle. She has spent more time sitting in the driveway than on the road lately.
approx. 210,000 (speedo stopped at 208,858)
Desmogged with factory exh. manifold (Incl. header with sale)
Smog Air Pump replaced with new idler pulley
Carb rebuilt by TLC Performance ( Feb. 2008)
New valve cover gasket and oil pan gasket (Nov. 2013)
Heavy duty dual friction Centerforce Clutch (Aug. 2005)
Water Pump and Thermostat replaced with OE (Jun. 2008)
V6 4Runner FR calipers
Heat works well / No AC
Additional factory battery tray added for dual batt. setup
Stock gearing (3.73 thirds)
Old Man Emu 3" Medium duty suspension (Incl. brand new leafs to make Heavy duty) (Feb. 2007)
4+ Ubolt Flip kit (Feb. 2007)
Aussie Locker FR and RR (Jun. 2007)
Extended FR sway bar links
2 Lo mod (bracket on t-case moved)
33x12.50 Super Swamper TSL Radials on 15x8 wagon wheels
Custom rear drawers for tools/storage
Custom rear rubber floor mat and side panels (Incl. factory panels with sale)
FJ62 dash grab handle
B-pillar grab handles added
Pass side A-pillar grab handle added
Seats reupholstered by PO and match factory door panels/carpet well
4" Rockford Fosgate door speakers FR and RR
6.5" Polk Audio speakers in RR
No radio
Toyota glass all the way around (windshield has a spot from road debri)
$4300 obo
FOR SALE...
Feb. 1983 FJ60. Purchased Aug. 2005 with 198k miles. 2F still running well. H42 still shifting fine. 4WD works well. Never had any major mech issues in the time I've owned it. Currently the carb needs cleaned or adjusted, requires a little choke to idle. She has spent more time sitting in the driveway than on the road lately.
approx. 210,000 (speedo stopped at 208,858)
Desmogged with factory exh. manifold (Incl. header with sale)
Smog Air Pump replaced with new idler pulley
Carb rebuilt by TLC Performance ( Feb. 2008)
New valve cover gasket and oil pan gasket (Nov. 2013)
Heavy duty dual friction Centerforce Clutch (Aug. 2005)
Water Pump and Thermostat replaced with OE (Jun. 2008)
V6 4Runner FR calipers
Heat works well / No AC
Additional factory battery tray added for dual batt. setup
Stock gearing (3.73 thirds)
Old Man Emu 3" Medium duty suspension (Incl. brand new leafs to make Heavy duty) (Feb. 2007)
4+ Ubolt Flip kit (Feb. 2007)
Aussie Locker FR and RR (Jun. 2007)
Extended FR sway bar links
2 Lo mod (bracket on t-case moved)
33x12.50 Super Swamper TSL Radials on 15x8 wagon wheels
Custom rear drawers for tools/storage
Custom rear rubber floor mat and side panels (Incl. factory panels with sale)
FJ62 dash grab handle
B-pillar grab handles added
Pass side A-pillar grab handle added
Seats reupholstered by PO and match factory door panels/carpet well
4" Rockford Fosgate door speakers FR and RR
6.5" Polk Audio speakers in RR
No radio
Toyota glass all the way around (windshield has a spot from road debri)
$4300 obo
Last edited:
Lookin for a 33x12.50 x 15 mud terrain for a spare.
Let me know what you got-
Let me know what you got-
- Thread starter
- #118
Spare for what?
It'd be for a customers heep
Really need to sale some Dana 44 axles. Let me know if any of you guys know of anyone building a custom rock crawler or up dating a 40 with some stronger axles maybe. I'll post up some pictures and info abot them in just a second. Need them to go so I can do some things to the 60..