For Sale Section (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Depends on how they look when I pull them. Couple hundred off retail?
This set has only seen maybe 100 miles of use.
I’m guessing I could probably pull the whole rear section off, inspect it, and it could bolt on no problem to anothe case “as-is”... not much work at all...
Here is how they get installed...

Our new 80 & 100-series Land Cruiser Low Range Gear Kit Install
 
Land Speeder said:
Depends on how they look when I pull them. Couple hundred off retail?
This set has only seen maybe 100 miles of use.
I’m guessing I could probably pull the whole rear section off, inspect it, and it could bolt on no problem to anothe case “as-is”... not much work at all...
Here is how they get installed...

Our new 80 & 100-series Land Cruiser Low Range Gear Kit Install
Click to expand...
I would like to get them from you, but I've still got a ton of stuff to buy for my spring over on the 40. I may be interested later down the road if you still have them.
 
bamabrock said:
We never got together a few months back and I forgot. I can come get the 18 hole wheels this weekend if you're around.
Click to expand...

If you need me to go over and pick them up?
Or if Clankbang will bring them to a meeting???
We some of our good ole active members to be Active Again!
 
No connection to seller - just posting because I find it amusing. This truck hit Facebook Marketplace for $8,500 yesterday. Today, it's $12,000. Same seller, same ad, etc.

upload_2018-12-12_9-2-37.webp
 
Anyone local need headlight parts before I post them on hidplanet, facebook then ebay?

I also have the following parts from uncompleted projects (all new in the box):

Gatling Gun Shrouds:
Gatling Gun 1.0

Ocular Shrouds:
Ocular

Morimoto Matchbox 2.0 Bi-Xenon Projectors (uses H1 HID bulbs)
Bi-Xenon: Morimoto Matchbox 2.0

Morimoto MiniH1 Bi-Xenen 6.0 Projectors (uses H1 HID bulbs) Note: link is the the current 7.0 model, not the 6.0 model I'm selling.
Bi-xenon: Morimoto Mini H1 7.0

Acme Super H1 Bi-Xenon Projectors (uses H1 HID bulbs)
Bi-Xenon: ACME Super (H1)

Morimoto Motoholders (Properly aligns the H1 bulb in the projector)
Morimoto MotoHo1ders

Also, I have several sets of used, but properly functioning Morimoto H1 ballasts and bulbs that I will include if wanted.
Bulbs
H1: Morimoto XB HID
Ballasts
AMP: Morimoto XB35 2.0
Complete kit
H1: Morimoto Elite


Everything is in the boxes and in my office in Homewood. If you're interested, let me know and we'll work up a deal and I'll deliver to the meeting.

Thanks, Brandon

EDIT: edited to post to show what is left.
 
Last edited:
bamabrock said:
I have a new badlands 12k winch that has never been hooked up or used. I mounted it to a harbor freight winch plate and it has sat on my CJ-7 project in my garage for two years. I've sold the project and already have a winch on my LX and YJ.

I know they are on sale for $270 all the time, so make a reasonable offer. All packaging, manual, accessories and everything it came with is there and I will throw in an unopened badlands wireless remote kit as well as the badlands winch plate. Roughly $400 of stuff in store.

They're are good value in budget winches, but I dont have anything to put it on. Located in Birmingham in the Crestline area.
HF Badlands 12 k DIY winch hack waterproof upgrade mod
Click to expand...
Anyone need a never hooked up winch?? Have the boxes, papers and all wiring that came with it.
$125 or its about to get stuck in my barn at the farm.

IMG_20180907_182611.webp
 
I’ll take the winch. Bring it to the meeting if you can. I’ll bring doll hairs.
 
bamabrock said:
Got a buddy who just bought a 2000 land cruiser. Anyone have tan 3rd row seats they want to get rid of?
Click to expand...

If you're still looking I've got some.
 
Land Speeder said:
I’ll take the winch. Bring it to the meeting if you can. I’ll bring doll hairs.
Click to expand...
I've got a new smittybilt 9.5k I bought and couldn't fit in the 100 series ARB bumper without a spacer. I was out of time before my CO trip, so I grabbed the warn off my jeep. The smittybilt wont fit in the jeep ARB bumper I'm using without cutting it up since it was designed for a warn, I'll let the smittybilt go for $200. Brand New, never wired up.
Smittybilt XRC 9.5K Waterproof 9500lb Winch Gen2 - 97495
 
Last edited:
Cleaning out some stuff from attic:

80 series rear axle shafts for e locker housings: $100 for the pair

10lb Powertank with regulator and mount: $275

Located in Memphis
 
heckler said:
Cleaning out some stuff from attic:

80 series rear axle shafts for e locker housings: $100 for the pair

10lb Powertank with regulator and mount: $275

Located in Memphis
Click to expand...

I used to knowa guy named heckler! He lived in Auburn... Dude was cooler than the other side of the pillow.

I didn't know the axle shafts were different. I want them if they can be used in my non-locked axle. But you have to deliver them. I have an open room for y'all to stay.
 
That's me....I think.

We need to hang out soon. Where are you now?

The axle shaft have longer splines cut for the elocker, otherwise they are the same and should fit in in a non locked axle.
 
heckler said:
That's me....I think.

We need to hang out soon. Where are you now?

The axle shaft have longer splines cut for the elocker, otherwise they are the same and should fit in in a non locked axle.
Click to expand...

I'm in West Hoover! aka, Bessemer! Just south of Birmingham!

Yeah.. I want them shafts!

Where are you? I may be coming up there this month for business.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)

Share this page

Back
Top Bottom