Fj80 AC

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 31, 2018
Threads
6
Messages
45
Location
38401 (Columbia, TN)
So I've searched. Maybe not hard enough. Maybe the answer is already been posted and I'm too dumb. Who knows. Here's my symptoms.

Driving to work ac on. Blowing cold. No issues. While driving I start smelling a burning smell (like electrical smell). I pull into the firehall pop the hood and find nothing burning or smoking. Step back inside and see some haze coming from air vents.

Air turns hot. Few days later I try ac again to no avail. Just blows warm/hot air.

Today I try a few things. Gauges put on and I'm reading about 150psi. Ac compressor clutch not engaging. I jumped the compressor and clutch doesn't engage. Which would tell me I'm low on freon.

I pulled the AC relay behind glove box. And waiting for a replacement. What am I missing? I just want the AC to work. It's Tennessee and still in the upper 90s. Any ideas.
 
A smoking ac clutch smells like burning electrical wires. It's harsh!
 
Driving to work ac on. Blowing cold. No issues. While driving I start smelling a burning smell (like electrical smell). I pull into the firehall pop the hood and find nothing burning or smoking. Step back inside and see some haze coming from air vents.

IF you had your A/C set to outside air (instead of recirculate) and your clutch burned up...that would explain the haze from the air vents and possibly the smell.

Today I try a few things. Gauges put on and I'm reading about 150psi.

Are you saying you hooked up manifold gauges (high and low side) and the pressure (on both sides was 150psi)?

Ac compressor clutch not engaging. I jumped the compressor and clutch doesn't engage.

If you jumped directly to your compressor and the clutch would not engage...then chances are good it is shot or the air gap is too great (should be around .020") or so.

Which would tell me I'm low on freon.

No. By jumping past the binary switch (directly to the compressor clutch) you bypass everything in that circuit. Also, IF you had 150psi 'static pressure'....that would be more than enough to keep the low pressure switch from interrupting the circuit.

But the 150psi reading IF STATIC corresponds with an ambient temp of about 112°F. Doubtful it was that hot there unless you checked the system right after running the engine (system heat soaked).

Basically we need some more info.

^^^^^

Expand for replies.
 
If the clutch is shot, it's about a wash to do the clutch vs all new compressor with clutch.
 
If the clutch is shot, it's about a wash to do the clutch vs all new compressor with clutch.

^^^^^

Absolutely!

And rarely does a clutch fail....that the compressor itself isn't pretty worn as well.

In fact, I think of clutch failure as the compressor being 'considerate' and letting us know to replace it BEFORE it grenades and sends metal all through the system, creating a REAL nightmare.
 
Oddly enuff my clutch died last spring. Took me a couple of cold/hot, cold/hot trips to reallize what was going on. If you can turn the compressor by hand, but the clutch will never engage, then it is likely the clutch. My clutch would engage when the engine was cold, but as it warmed up it would loose traction/friction and the compressor quit turning. Hard to find a clutch that is affordable. Hard to replace without breaking the system open, especially with a SuperCharger in the way, but we did/
 
Looks like you guys are right. Not like I doubted you. Bad compressor. So now to find a new one that won't break the bank. While I'm tearing that apart I guess I'll rebuild the front knuckles. Thanks for all the input.
 
Back
Top Bottom