FJ62 thermostat replacement quick write up
- Thread starter Randy88FJ62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
RevISK
SILVER Star
Did you ever find the part number for the bolts? Would be good info for this thread.Wonder if I can get a Snow Version gasket!
You know I couldn't resist @ToyotaMatt
Personally never broke a bolt on a thermostat housing but I always use anti-seize on most everything. Learned that when working on tractors and boats.
Same here, though I still try to avoid reusing bolts if I can. Broken a few on reinstallation before due to annealing, so I try to just go new when it's a small investment.
Wonder if I can get a Snow Version gasket!
You know I couldn't resist @ToyotaMatt
mr spook , no cold spec. gaskets that i know of
but ....
since toyota's current thermostat housing's hardware is circa. era. hot-dipped galvanized outdated simple minded weak and sadder then sad ....
i have snapped my share of not so old 12mm HEX sandwich bolts , and snapped a few lower housing block face bolt ears off too in the past ...
a single lock washer is outdated engineering technology , they bite on the way out because nobody thought about that in 1961 ....
a wider flat washer distributes the torque yield evenly over a larger surface area , and the lock washer does not bite into a smooth and same grade steel smooth flat surface
i wondered why one day , and after doing what i do we now have a better choice .
better is better , stronger is stronger and things like JIS double SEMS washers , and the highest salt spray rated surface treatment possible all add up to
SNOW VERSION grade modern age 2025 updated and upgraded for 1961-1990 F , F1.5 , 2F 3F carb 3F-E series engines ....
.
12mm hex / M8 sandwich bolts : 91611-B0845 = JIS #4 mark head / my updated = JIS #7 mark head
14mm hex / M10 block face bolts 91611-61025 = JIS #6 mark head / my updated = JIS #8 mark head
- Surface treatment : violet blue silver zinc = highest salt spray rating / verses toyota galvanized = low salt spray rating
.
,
sand
Last edited: