FJ40 temp runs at 3rd mark

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 16, 2006
Threads
166
Messages
620
Location
Tulsa, OK
Just took my 78 FJ40 for the first real drive around town on a 103 degree day. Temp ran for a bit below 2nd mark then went up to and stayed on the third mark. If I remember correctly this is really hot right? Where is the gauge supposed to rest?
 
there is no "correct" spot.
start replacing parts in the cooling system, or hook up a "real" mech gauge to see a true number of what it's really doing.

i picked up a little stick type temp thermometer from one of the hvac guys at work, just see what mine does.
\___l____l___/
when mine is at the second line(aka bottom of the ok range), i'm at 170/5ish*F. which is also where it runs 90% of the time.
 
my temp hardly ever even showed up on the stock gauge. it made me kinda nervous, so i put an after market gauge in and it runs no higher than 185, but you'ld never know it from the stock gauge. the point is that the stock gauge doesn't really tell you anything unless you've checked it against a reliable source. i think they all read a little different.
 
My experience has been that if you have the correct gauge, sending unit, and thermostat the first mark on the gauge should be 180 degrees F for earlier trucks or 190 degrees F for later. I think the later trucks with a fan clutch had a 190 degree thermostat with the corresponding gauge and sending unit.

If you have an after-market radiator cap with a relief pressure greater than 13 PSI the truck might run hotter.
 
Back
Top Bottom