Fixing a "shudder"

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 12, 2015
Threads
92
Messages
4,860
Location
Cunningham, Tennessee
Website
hotmilkforbreakfast.wordpress.com
Just recently I've noticed an itinerant shudder, accompanied by a general lack of power and overall fuel mileage dropping off. Since I'd just finished fixing a wicked electrical problem involving lots of stuff going wrong at once, I assumed the shudder would be a similar job to diagnose.

First thing I checked was the kick down cable. It was completely loosey goosey, so I read the FSM, read several threads here, and basically just got it tight. My cable is quite stretched, so I just got it tight to the point where it is engaged by the throttle quadrant at all times. I think that was a better deal than measuring where the swage sticks out.

It made things slightly better, but still had that shudder.

Next, I bought a new set of plugs and wires. Once some genuine Densos showed up today, I pulled my HT lead and found this:

9203_10207852517145308_8789446688286546158_n.webp


12804627_10207852516905302_5325989926219023904_n.webp


I dunno, is 20 years long enough for an HT lead?

I'm guessing that might have something to do with the shudder. I quickly put on the new one and took it out and it's like someone put another engine on there.

Can't wait until I put the rest of this box under the hood....

1463592_10207852517265311_7895035794501507576_n.webp
 
Back
Top Bottom